1 / 49

Lab Management Plan Student Training September 2014

Lab Management Plan Student Training September 2014. 1.0 Scope and Introduction. Supplements the MSOE LMP, Document E-3 Provides specific information relevant to individual labs Used to train students taking courses in this lab to ensure a safe environment and

Download Presentation

Lab Management Plan Student Training September 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lab Management Plan Student TrainingSeptember 2014

  2. 1.0 Scope and Introduction • Supplements the MSOE LMP, Document E-3 • Provides specific information relevant to individual labs • Used to train students taking courses in this lab to ensure • a safe environment and • compliance with environmental, health and safety regulations • Used to familiarize the student with the lab environment including safety equipment and procedures, clothing requirements and limitations on possessions and material that may come into the lab

  3. 2.0 Basic Lab Rules • Laboratory hours are from 7 am to 10 pm. • Buddy system is required when working in the hard labs unless a lab technician is present.  • Food and drink, including water, are NOT allowed to be stored or consumed in the lab. (N/A soft labs) • Smoking is NOT allowed in MSOE buildings. Chewing tobacco is also NOT allowed in the lab. • NO children or pets are allowed in the lab. • NO open toed shoes are allowed in the lab. (N/A soft labs) • Loose fitting or flowing clothing, shorts, neckties, long necklaces or neck scarves should NOT be worn in the lab when working. (N/A soft labs) • Hair shoulder length or longer must be pulled back and out of the way of your face for the period of time you are in the lab. (N/A soft labs) • Personal Protective Equipment may be required. (N/A soft labs) • NO paints, lubricants or chemicals of any kind may be brought into the student project area without prior approval by the faculty advisor AND all chemicals must be submitted to the Chemical Inventory Gatekeeper for labeling and entering into the database. A copy of the Material Safety Data Sheet (MSDS) must accompany any chemical

  4. 3.0 LMP Training for Students • Equipment Locations • Emergency Procedures • Hazard Communication/Right to Know-MSDS • Chemical Handling, Storage and Disposal • PPE

  5. Safety Equipment Locations (see room layout map) • Phone • Emergency Evacuation Route Map and Room Layout Map are located at the room’s exit. • Fire Extinguisher • First Aid Kit • Emergency Eye Wash locations include: CC-82,SG-01, SG-132, S-225, S-233, S-261, S-263 and Krueger Hall-Student Lab. • Fire Blanket • Emergency Deluge Shower is located in the Men’s Bathroom near S-263. • Fire Alarm Pull Stations • Chemical Spill Kit Locations include: CC-82, SB-30, SG-01, SG-34, SG-36, SG-37, SG-38, S-132, S-233, S-261, S-263 and Krueger Hall- Student Project Lab.

  6. Safety Equipment Locations (continued) • The Chemical Lists are located in the Lab Management Plan which located at the room’s exit. •  The MSDS sheets are located in the LMP black binders in the ME department office and on the MSOE website. • Storage Cabinets are located in labs requiring the use of and storage of flammable materials. These locations are: CC-82, SB-30, SG-34, SG-36, SG-37, SG-38, SG-51, S-261, S-263 and Krueger Hall-Student Project Lab. •  Satellite Accumulation Areas for unwanted material located in labs: CC-82 ,SB-30, SG-01, SG-36, SG-38, S-233, S-263, and Krueger Hall-Student Project Lab. •  Outside Rally point for this building is located in the Athletic field. Once everyone is accounted for and it is determined that a long term indoor location is desired. The long term/inside rally point is located in Student Life and Campus Center, 3rd Floor. •  Each lab’s Lab Management Plan is located at the room’s exit and in the ME department office.

  7. Emergency Procedures Guide • The Emergency Procedures Guide Flipchart should be posted in every lab. • The contents of the guide should be reviewed with students on the first day of class. • Slides 10 through 15 cover a subset of this guide. • Emergency Shelter Locations are noted on the back of the flipchart.

  8. Severe Weather Evacuation Procedure • If a Tornado WARNING or Severe Weather WARNING has been issued or a tornado has been spotted near the campus take the following action: • Proceed out of room and close room doors after leaving. • Move to the lowest level possible and to interior hallways (and away from windows and long span roofs found in cafeteria and gymnasiums.) Use the evacuation route maps located at exit door for appropriate stairways. • Supervisory personnel, classroom instructors, or lab technicians should make certain everyone vacates the lab room. Take note of and report anyone missing. • Remain in lowest level interior hallway until Public Safety gives an all clear notification via the campus PA system.

  9. Fire Emergency Evacuation ProcedureIf there is a fire in the laboratory: • Verbally alert others in the lab and the professor running the lab. • Do NOT attempt to fight the fire unless you have been trained and if you believe you have sufficient time to evacuate the room. • Turn off equipment if you have time. • Proceed out of the room. Attempt to close the door behind you. • Proceed from hallway to building exit. • Activate the fire alarm pull station located at building exit. • Call the campus emergency number x7159 when you have reached a location sufficiently far from the fire to safely do so either by cell phone or campus phone. • NEVER attempt to use the building’s elevator to evacuate the building. • Assemble at the designated outside rally point located at the Athletic Field. Once everyone is accounted for and it is determined that a long term indoor location is desired. The ME dept. can then move to the inside rally point for this lab which is located in Student Life and Campus Center, 3rd Floor. • Do NOT under any circumstances leave the rally point to return to the building until you are told it is safe to do so by competent authority.  

  10. Fire Emergency Evacuation ProcedureIn the event of a Fire Alarm Sounding: • Turn off equipment if you have time. • Proceed out of the room and attempt to close the door behind you. • Proceed from hallway to building exit. • NEVER attempt to use the building’s elevator to evacuate the building • Assemble at the designated outside rally point located in Athletic Field. Once everyone is accounted for and it is determined that a long term indoor location is desired. The ME dept. can then move to the inside rally point for this lab which is located in Student Life and Campus Center, 3rd Floor. 6. Do NOT under any circumstances leave the rally point to return to the building until you are told it is safe to do so by competent authority.

  11. Personal Injury/ Medical Emergency Procedure • Note that a response to a personal injury is going to vary by the severity of the injury. • Minor cuts, burns and abrasions are typically handled by the injured party. A small First Aid kit is available in the lab. Follow-up with Campus Health Services. • If chemicals come in contact with your skin, rinse skin with water immediately. If chemicals come in contact with your eyes, rinse eyes following the directions on container’s label and on the emergency eye wash station. Emergency eye wash stations are located in the following labs: CC-82, SG-01, SG-132, S-225, S233, S-261, S-263 and Krueger Hall-Student Project Lab. Follow-up with Campus Health Services and/or physician. • More severe wounds or burns will require outside assistance. Contact Public Safety IMMEDIATELY. The Emergency number is x7159 if dialed from a campus phone or (414) 277-7159 from a cell phone. Give the building and room number and a description of the injury or situation that has occurred.

  12. Medical Emergency Procedure • In the event of discovering blood or bodily fluids in the lab: •  DO NOT attempt to clean up the area due to the potential of blood borne pathogens. There are staff personnel in the Facilities department specially trained in containing and cleaning up blood and other bodily fluids. • Leave the area and call x7159 or (414) 277-7159 from a cell phone IMMEDIATELY and notify Public Safety of the situation and the room number.

  13. Chemical Spill Procedure(N/A soft labs) • Chemicals used in this lab are described on the chemical list. • Flammable materials are to be stored in a storage cabinet located within this lab. •  If a chemical spill occurs: • Identify the spilled material, if safe to do so, by reading the label or otherwise investigating further with the lab technician. • If the spill is relatively minor, personnel who have been trained in how to handle the material can clean it up using absorbent materials in the spill kit. Contact the lab technician if in doubt. • Waste materials generated from the clean-up must be properly disposed. Contact the lab technician for disposal. • If it is a major spill and cannot be handled by lab personnel trained in how to handle the material contact Public Safety for assistance at x7159 or dial 414-277-7159.

  14. Chemical Inventory System • All chemicals have been inventoried in the new electronic CisPro inventory database. • All chemicals must have a MSDS sheet in the CisPro database. • All chemicals must have a label identifying it. • New chemicals must be entered into this database by the ME Deptgatekeeper. No chemicals are allowed in soft labs.

  15. Hazard Communications (Right to Know) (N/A soft labs) • Material Safety Data Sheets (MSDSs) are available for the hazardous materials that are present in the lab. The MSDSs provide information on the properties of the chemicals as well as toxicity, health risks, fire response and first aid measures. • The Chemical Lists are located in the Lab Management Plan located at the room’s exit and in the LMP black binders in S-264 or in the CisPro database https://cisprolive.chemswlive.com/CISPro/login_msds.asp?accessid=686. • The MSDS sheets are located in the LMP black binders in labs, S-264 , CisPro database and on the MSOE website at https://cisprolive.chemswlive.com/CISPro/login_msds.asp?accessid=686 • All chemical’s containers must be labeled properly with the contents and hazard warning

  16. Chemical Handling (N/A soft labs) • Carefully read the labels before using a chemical. The manufacturer’s or supplier’s MSDS will provide special handling information. • Be aware of the potential hazards existing in the laboratory and the appropriate safety precautions. • Know the location and proper use of emergency equipment, the procedures for responding to emergencies, and the proper methods for storage, transport and disposal of chemicals within the facility. •  Label all secondary chemical containers with the appropriate identification. • Use only those chemicals for which you have the appropriate exposure controls (such as a chemical fume hood) and training. Always use adequate ventilation with chemicals. • Inspect equipment or apparatuses for damage before adding a hazardous chemical. DO NOT use damaged equipment. • Inspect personal protective apparel and equipment for integrity or proper functioning before use.

  17. Chemical Storage (N/A soft labs) • Chemicals must be properly labeled. • Explain the chemical storing system, including hazards of incompatible chemicals, lack of secondary containment, and consequences if the chemicals are not stored properly. • Flammable materials must be stored in the storage cabinets located in labs: CC-82, SB-30, SG-34, SG-36, SG-37, SG-38, SG-51, S-262, S-263 and Krueger Hall-Student Project Lab. • Used oily/dirty rags should be placed in the oily rag cans located in labs: SB-30, SG-01, SG-34, SG-36, SG-38, S-262, S-263 and Krueger Hall-Student Project Lab.

  18. Chemical Disposal (N/A soft labs) • Notify the lab technician if you have a chemical you no longer need. The lab technician will arrange for proper disposal, transfer or storage. • Satellite Accumulation Areas (SAA) for unwanted material are located in labs: CC-82, SB-30, SG-01, SG-36, SG-38, S-233, S-263 and Krueger Hall-Student Project Lab. The lab technician will arrange for the transfer of unwanted material the Central Accumulation Area (CAA). • Only certain MSOE staff who have appropriate training are authorized to transport unwanted material to the CAA. • ALL batteries must be recycled. Bring dead/unusable batteries to the lab technician for collection prior to disposal. The container should be labeled “USED BATTERIES – UNIVERSAL WASTE.”

  19. Chemical Fume Hoods(only in S-233) • When using a chemical hood please note the following: • Keep all chemicals and apparatus at least six inches inside the hood (behind the sash). • Hoods are not intended for chemical storage. Chemicals should not block vents or alter airflow patterns. • Keep the hood sash at a minimum height (2 or 3 inches) when not manipulating chemicals or adjust apparatus within the hood. • When working in front of a fume hood, make sure the sash opening is appropriate to allow adequate air velocity through the face of the hood.

  20. Personal Protective Equipment (PPE) • Personal protective equipment (PPE) should be selected on a task basis and checked to make sure it is in good condition prior to use. •  Instructor’s determination: • Eye protection: safety glasses, goggles, face shield • Protective gloves • Protective clothing • Ear protection • Dust masks

  21. 4.0 Training Documentation • Student LMP Training Verification (sample on next slide) must be signed by students after training is completed • Completed Student Training Verification Forms due after the first lab in ME dept. office. Appendix A - Chemical List (n/a soft labs) Appendix B – Lab Room Layout

  22. Chemical List - Example

  23. Training is Complete

  24. Room Layouts Instructor Note: Slides 25 to 48 are the Room Layouts for all the labs. Select your specific lab and insert as Slide no. 8. Note: SG-01 has been revised.

More Related