1 / 36

Lecture 10 Capacitance and capacitors

Lecture 10 Capacitance and capacitors. Capacitors. Capacitors are devices that store energy in an electric field. Capacitors are used in many every-day applications Heart defibrillators Camera flash units Capacitors are an essential part of electronics.

adara
Download Presentation

Lecture 10 Capacitance and capacitors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 10 Capacitance and capacitors General Physics II, Lec 10, By/ T.A. Eleyan

  2. Capacitors • Capacitors are devices that store energy in an electric field. • Capacitors are used in many every-day applications • Heart defibrillators • Camera flash units • Capacitors are an essential part of electronics. • Capacitors can be micro-sized on computer chips or super-sized for high power circuits such as FM radio transmitters. General Physics II, Lec 10, By/ T.A. Eleyan

  3. Definition of Capacitance • The definition of capacitance is • The units of capacitance are coulombs per volt. • The unit of capacitance has been given the name farad (abbreviated F) named after British physicist Michael Faraday (1791 - 1867) • A farad is a very large capacitance • Typically we deal with F (10-6 F), nF (10-9 F),or pF (10-12 F) General Physics II, Lec 10, By/ T.A. Eleyan

  4. The parallel-plate capacitor • Thecapacitance of a device depends on the area of the plates and the distance between the plates • where A is the area of one of the plates, d is the separation, e0 is a constant (permittivity of free space), e0= 8.85×10-12 C2/N·m2 A +Q d A -Q General Physics II, Lec 10, By/ T.A. Eleyan

  5. Example: A parallel plate capacitor has plates 2.00 m2 in area, separated by a distance of 5.00 mm. A potential difference of 10,000 V is applied across the capacitor. Determine • the capacitance • the charge on each plate Solution: Since we are dealing with the parallel-plate capacitor, the capacitance can be found as Given: DV=10,000 V A = 2.00 m2 d = 5.00 mm Find: C=? Q=? Once the capacitance is known, the charge can be found from the definition of a capacitance via charge and potential difference: General Physics II, Lec 10, By/ T.A. Eleyan

  6. Cylindrical Capacitor • Consider a capacitor constructed of two collinear conducting cylinders of length L. • The inner cylinder has radius r1 andthe outer cylinder has radius r2. • Both cylinders have charge perunit length  with the inner cylinderhaving positive charge and the outercylinder having negative charge. • We will assume an ideal cylindrical capacitor • The electric field points radially from the inner cylinder to the outer cylinder. • The electric field is zero outside the collinear cylinders. General Physics II, Lec 10, By/ T.A. Eleyan

  7. We apply Gauss’ Law to get the electric field between the two cylinder using a Gaussian surface with radius r and length L as illustrated by the red lines • … which we can rewrite to get anexpression for the electric fieldbetween the two cylinders General Physics II, Lec 10, By/ T.A. Eleyan

  8. As we did for the parallel plate capacitor, we define the voltage difference across the two cylinders to be V=V1 – V2. • The capacitance of a cylindrical capacitor is General Physics II, Lec 10, By/ T.A. Eleyan

  9. Spherical Capacitor • Consider a spherical capacitor formed by two concentric conducting spheres with radii r1 and r2 • Let’s assume that the inner sphere has charge +q and the outer sphere has charge –q. • The electric field is perpendicular to the surface of both spheres and points radially outward General Physics II, Lec 10, By/ T.A. Eleyan

  10. To calculate the electric field, we use a Gaussian surfaceconsisting of a concentric sphere of radius r such that r1 < r < r2 • The electric field is always perpendicular to the Gaussian surface so • … which reduces to General Physics II, Lec 10, By/ T.A. Eleyan

  11. To get the electric potential we follow a method similar to the one we used for the cylindrical capacitor and integrate from the negatively charged sphere to the positively charged sphere • Using the definition of capacitance we find • The capacitance of a spherical capacitor is then General Physics II, Lec 10, By/ T.A. Eleyan

  12. C1 C5 C3 C2 C4 Combinations of capacitors • It is very often that more than one capacitor is used in an electric circuit • We would have to learn how to compute the equivalent capacitance of certain combinations of capacitors C2 C1 C3 General Physics II, Lec 10, By/ T.A. Eleyan

  13. a C1 +Q1 C2 +Q2 V=Vab -Q1 -Q2 b a. Parallel combination Connecting a battery to the parallel combination of capacitors is equivalent to introducing the same potential difference for both capacitors, A total charge transferred to the system from the battery is the sum of charges of the two capacitors, General Physics II, Lec 10, By/ T.A. Eleyan

  14. Parallel combination: • Analogous formula is true for any number of capacitors, • It follows that the equivalent capacitance of a parallel combination of capacitors is greater than any of the individual capacitors (parallel combination) General Physics II, Lec 10, By/ T.A. Eleyan

  15. a C1 +Q1 C2 +Q2 V=Vab -Q1 -Q2 b Example: A 3 mF capacitor and a 6 mF capacitor are connected in parallel across an 18 V battery. Determine the equivalent capacitance and total charge deposited. Given: V = 18 V C1= 3 mF C2= 6 mF Find: Ceq=? Q=? First determine equivalent capacitance of C1 and C2: Next, determine the charge General Physics II, Lec 10, By/ T.A. Eleyan

  16. a +Q1 C1 -Q1 V=Vab c +Q2 C2 -Q2 b Series combination Connecting a battery to the serial combination of capacitors is equivalent to introducing the same charge for both capacitors, A voltage induced in the system from the battery is the sum of potential differences across the individual capacitors, General Physics II, Lec 10, By/ T.A. Eleyan

  17. Series combination: • Analogous formula is true for any number of capacitors, • It follows that the equivalent capacitance of a series combination of capacitors is always less than any of the individual capacitance in the combination (series combination) General Physics II, Lec 10, By/ T.A. Eleyan

  18. a +Q1 C1 -Q1 V=Vab c +Q2 C2 -Q2 b Example: A 3 mF capacitor and a 6 mF capacitor are connected in series across an 18 V battery. Determine the equivalent capacitance and total charge deposited. Given: V = 18 V C1= 3 mF C2= 6 mF Find: Ceq=? Q=? First determine equivalent capacitance of C1 and C2: Next, determine the charge General Physics II, Lec 10, By/ T.A. Eleyan

  19. Example: Capacitors in Series and Parallel Three capacitors are connected as shown. (a) Find the equivalent capacitance of the 3-capacitor combination. (b) The capacitors, initially uncharged, are connected across a 6.0 V battery. Find the charge and voltage drop for each capacitor. General Physics II, Lec 10, By/ T.A. Eleyan

  20. General Physics II, Lec 10, By/ T.A. Eleyan

  21. Energy stored in a charged capacitor V • Consider a battery connected to a capacitor • A battery must do work to move electrons from one plate to the other. The work done to move a small charge q across a voltage V is W = V q. • As the charge increases, V increases so the work to bring q increases. Using calculus we find that the energy (U) stored on a capacitor is given by: V q Q General Physics II, Lec 10, By/ T.A. Eleyan

  22. + + + + + + + + + + + - - - - - - - - - - - Example: electric field energy in parallel-plate capacitor Find electric field energy density (energy per unit volume) in a parallel-plate capacitor Recall Thus, and so, the energy density is General Physics II, Lec 10, By/ T.A. Eleyan

  23. C1 V C2 C3 • Example: In the circuit shown V = 48V, C1 = 9mF, C2 = 4mF and C3 = 8mF. • (a) determine the equivalent capacitance of the circuit, • (b) determine the energy stored in the combination by calculating the energy stored in the equivalent capacitance, The energy stored in the capacitor C123 is then General Physics II, Lec 10, By/ T.A. Eleyan

  24. -Q -Q +Q +Q Capacitors with dielectrics • A dielectrics is an insulating material (rubber, glass, etc.) • Consider an insolated, charged capacitor • Notice that the potential difference decreases (k = V0/V) • Since charge stayed the same (Q=Q0) → capacitance increases • dielectric constant: k = C/C0 • Dielectric constant is a material property Insert a dielectric V0 V General Physics II, Lec 10, By/ T.A. Eleyan

  25. Capacitance is multiplied by a factor k when the dielectric fills the region between the plates completely • E.g., for a parallel-plate capacitor • The capacitance is limited from above by the electric discharge that can occur through the dielectric material separating the plates • In other words, there exists a maximum of the electric field, sometimes called dielectric strength, that can be produced in the dielectric before it breaks down General Physics II, Lec 10, By/ T.A. Eleyan

  26. General Physics II, Lec 10, By/ T.A. Eleyan

  27. Example: Take a parallel plate capacitor whose plates have an area of 2 m2 and are separated by a distance of 1cm. The capacitor is charged to an initial voltage of 3 kV and then disconnected from the charging source. An insulating material is placed between the plates, completely filling the space, resulting in a decrease in the capacitors voltage to 1 kV. Determine the original and new capacitance, the charge on the capacitor, and the dielectric constant of the material. Since we are dealing with the parallel-plate capacitor, the original capacitance can be found as The dielectric constant and the new capacitance are The charge on the capacitor can be found to be General Physics II, Lec 10, By/ T.A. Eleyan

  28. - + + - + - - - - - - + + + + + - - + + - + - - - - - + + + + + - + + - + - - - - - - + + + + + - - + - + - - - - - + + + + + + + + + + - - - - + + + + - - - - + + + + - - - - + + + + - - - - How does an insulating dielectric material reduce electric fields by producing effective surface charge densities? Reorientation of polar molecules Induced polarization of non-polar molecules Dielectric Breakdown: breaking of molecular bonds/ionization of molecules. General Physics II, Lec 10, By/ T.A. Eleyan

  29. Additional Questions (Capacitance and capacitors) General Physics II, Lec 10, By/ T.A. Eleyan

  30. Two capacitors, C1=2mF and C2=16mF, are connected in parallel.  What is the value of the equivalent capacitance of the combination? • (2) Calculate the equivalent capacitance of the two capacitors in the previous exercise if they are connected in series. • (3) A 100pF capacitor is charged to a potential difference of 50V, the charging battery then being disconnected.  The capacitor is then connected in parallel with a second (initially uncharged) capacitor.  If the measured potential difference drops to 35V, what is the capacitance of this second capacitor? • (4) A parallel-plate capacitor has circular plates of 8.0cm radius and 1.0mm separation.  What charge will appear on the plates if a potential difference of 100V is applied? General Physics II, Lec 10, By/ T.A. Eleyan

  31. (5) In figure the battery supplies 12V.  (a) Find the charge on each capacitor when switch S1 is closed, and (b) when later switch S2 is also closed.  Assume C1=1mF, C2=2mF, C3=3mF, and C4=4mF. (6) A 16pF parallel-plate capacitor is charged by a 10V battery.  If each plate of the capacitor has an area of 5cm2, what is the energy stored in the capacitor?  What is the energy density (energy per unit volume) in the electric field of the capacitor if the plates are separated by air? (7) The energy density in a parallel plate capacitor is given as 2.1×l0-9.  What is the value of the electric field in the region between the plates? General Physics II, Lec 10, By/ T.A. Eleyan

  32. (8) a- Determine the equivalent capacitance for the capacitors shown in figure.   b- If they are connected to 12V battery, calculate the potential difference across each capacitor and the charge on each capacitor (9) A 6.0mF capacitor is connected in series with a 4.0mF capacitor and a potential difference of 200 V is applied across the pair. (a) What is the charge on each capacitor? (b) What is the potential difference across each capacitor? (10) Repeat the previous problem for the same two capacitors connected in parallel. General Physics II, Lec 10, By/ T.A. Eleyan

  33. [10] In a parallel plate capacitor an electron moves from the positively charged plate to the negatively charged plate. Which of the following are true for the electron? • The potential energy increases, and the electrical potential increases. • The potential energy increases, and the electrical potential decreases. • The potential energy decreases, and the electrical potential increases. • The potential energy decreases, and the electrical potential decreases. • The potential energy of the electron is unchanged. [11] In Fig. the charge on the 3 micro Farad capacitor is 1 micro Coulomb. What is the voltage across the 2 micro Farad capacitor? General Physics II, Lec 10, By/ T.A. Eleyan

  34. [12] A parallel plate capacitor is held at constant voltage. Initially there is only air between the plates. If a dielectric with a dielectric constant of 2 is inserted into the capacitor, what happens to the energy stored in the capacitor? • The energy will go up by a factor of 4. • The energy will go up by a factor of 2. • The energy will be unchanged. • The energy will go down by a factor of 2. • The energy will go down by a factor of 4. [13] Evaluate the equivalent capacitance of the configuration shown in Figure. All the capacitors are identical, and each has capacitance C. General Physics II, Lec 10, By/ T.A. Eleyan

  35. [14] For the system of capacitors shown in Figure, find (a) the equivalent capacitance of the system, (b) the potential across each capacitor, (c) the charge on each capacitor, and (d) the total energy stored by the group [15] Find the equivalent capacitance between points a and b in the combination of capacitors shown in Figure. General Physics II, Lec 10, By/ T.A. Eleyan

  36. [15]Two capacitors when connected in parallel give an equivalent capacitance of 9.00 pF and give an equivalent capacitance of 2.00 pF when connected in series. What is the capacitance of each capacitor? [16] Two capacitors when connected in parallel give an equivalent capacitance of Cp and an equivalent capacitance of Cs when connected in series. What is the capacitance of each capacitor? General Physics II, Lec 10, By/ T.A. Eleyan

More Related