1 / 84

NETWORKS

NETWORKS. Covering High speed switching fabrics Twisted pair Mediums Fiber optics Radio Ethernet Coax. NETWORKS. Logarithms Channel capacity Hartley-Shannon Law Review of the Layers Things you need to get started on a LAN. High Speed Switching Fabrics.

ada
Download Presentation

NETWORKS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NETWORKS • Covering • High speed switching fabrics • Twisted pair • Mediums • Fiber optics • Radio • Ethernet Coax

  2. NETWORKS • Logarithms • Channel capacity • Hartley-Shannon Law • Review of the Layers • Things you need to get started on a LAN

  3. High Speed Switching Fabrics • Aside from the Bus topologies, there are many others, with higher throughput, like • ring • Transputer Topology • Torus Topology • Cray T3D

  4. The Transputer Topology 4 way connectivity

  5. The Torus Topology 4 way connectivity

  6. Torus Topology 5 way connectivity

  7. Cray T3D, Torus Topology 6 way connectivity

  8. Twisted Pair • Typically a balanced digital line • 2 conductor insulated wire • Twisting the wire minimizes the electromagnetic interference • A primary medium for voice traffic • used as serial cable to hookup networks

  9. Twisted Pair • The repeat coil (transformer) or Op-Amp can be used

  10. Twisted Pair • In telephone modem terms this is known as a DAA (Data Access Arrangement).

  11. Mediums • UTP (unshielded twisted pair) • typical voice line • Generally good for star LAN short haul 10 Mbps • STP (shielded twisted pair) • level 5 data grade (100 Mbps) • RS-422 • balanced serial data communications • RS-232 • unbalanced serial data communications

  12. Mediums • Coax • CATV (community antenna TV) • telephone long line via FDM carries 10,000 voices • LAN-WAN • cable TV

  13. Mediums • Fiber Optics • use total internal reflection • This occurs in a transparent medium whose index of refraction is higher that surrounding medium • optic fiber is a wave guide in the 10 raised 14 to 10 raised 15 hz range

  14. Fiber Optics • multimode • different rays have different path lengths, loss occurs • multimode-graded index • variable core index, focuses rays more efficiently that multimode • single mode • only the axial ray passes, most efficient.

  15. Fiber Optics • LED (light emmiting diode) • inexpensive • ILD (injection laser diode ) • more expensive (more efficient and higher bandwidth that LED). • Detectors • Photo Diodes

  16. Fiber Optics • light propagates best at 850, 1300 and 1500 nm • 640 nm = wavelength of HE-NE red = .64 micro meters • ultra pure fused silica is best, plastic is cheapest and worst

  17. Fiber Optics • bandwidth - 2 Gbps (typical) • smaller size and weight than copper • lower attenuation than coax • electromagnetically isolated • greater repeater spacing, 5 Gbs over 111 km w/o repeater • phasing out cable.

  18. Radio • Microwave • line-of-sight • parabolic dish

  19. Ethernet Coax • For Ethernet coax • ASIC’s which give a digital interface to a bus topology LAN • For example, the Crystal Semiconductor Corporation CS83C92 is a Coaxial Transceiver Interface on a chip

  20. Ethernet Coax

  21. Ethernet Coax • CS83C92 • Balanced serial inputs • Uses Manchester codes • All operations with IEEE 802.3 of the 10Base5 (Ethernet) and 10Base2 (Cheapernet) standard

  22. Ethernet Coax • CS83C92 have • equalizers • amplifiers • idle detectors, receiver squelch circuits • collision testers • oscillators • differential line drivers • (with other stuff too!!!) • A manchester code convert chip is also needed

  23. Logarithms • Log Review

  24. Logarithms • For example

  25. Logarithms

  26. Logarithms • Laws of Logarithms

  27. Intermodulation noise • results when signals at different frequencies share the same transmission medium

  28. the effect is to create harmonic interface at

  29. cause • transmitter, receiver of intervening transmission system nonlinearity

  30. Crosstalk • an unwanted coupling between signal paths. i.e hearing another conversation on the phone • Cause • electrical coupling

  31. Impluse noise • spikes, irregular pulses • Cause • lightning can severely alter data

  32. Channel Capacity • Channel Capacity • transmission data rate of a channel (bps) • Bandwidth • bandwidth of the transmitted signal (Hz) • Noise • average noise over the channel • Error rate • symbol alteration rate. i.e. 1-> 0

  33. Channel Capacity • if channel is noise free and of bandwidth W, then maximum rate of signal transmission is 2W • This is due to intersymbol interface

  34. Channel Capacity • Example w=3100 Hz C=capacity of the channel c=2W=6200 bps (for binary transmission) m = # of discrete symbols

  35. Channel Capacity • doubling bandwidth doubles the data rate if m=8

  36. Channel Capacity • doubling the number of bits per symbol also doubles the data rate (assuming an error free channel) (S/N):-signal to noise ratio

  37. Hartley-Shannon Law • Due to information theory developed by C.E. Shannon (1948) C:- max channel capacity in bits/second w:= channel bandwidth in Hz

  38. Hartley-Shannon Law • Example W=3,100 Hz for voice grade telco lines S/N = 30 dB (typically) 30 dB =

  39. Hartley-Shannon Law

  40. Hartley-Shannon Law • Represents the theoretical maximum that can be achieved • They assume that we have AWGN on a channel

  41. Hartley-Shannon Law C/W = efficiency of channel utilization bps/Hz Let R= bit rate of transmission 1 watt = 1 J / sec =enengy per bit in a signal

  42. Hartley-Shannon Law S = signal power (watts)

  43. Hartley-Shannon Law k=boltzman’s constant

  44. Hartley-Shannon Law assuming R=W=bandwidth in Hz In Decibel Notation:

  45. Hartley-Shannon Law S=signal power R= transmission rate and -10logk=228.6 So, bit rate error (BER) for digital data is a decreasing function of For a given , S must increase if R increases

  46. Hartley-Shannon Law • Example For binary phase-shift keying =8.4 dB is needed for a bit error rate of let T= k = noise temperature = C, R=2400 bps &

  47. Hartley-Shannon Law • Find S S=-161.8 dbw

  48. ADC’s • typically are related at a convention rate, the number of bits (n) and an accuracy (+- flsb) • for example • an 8 bit adc may be related to +- 1/2 lsb • In general an n bit ADC is related to +- 1/2 lsb

  49. ADC’s • The SNR in (dB) is therefore where about

More Related