1 / 18

Data and Computer Communications by William Stallings Eighth Edition

Multiplexing. Data and Computer Communications by William Stallings Eighth Edition. Click to edit Master subtitle style. Chapter 8. Multiplexing. Multiplexing allows several transmission sources to share a larger transmission capacity. multiple links on 1 physical line

acuevas
Download Presentation

Data and Computer Communications by William Stallings Eighth Edition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multiplexing Data and Computer Communications by William Stallings Eighth Edition Click to edit Master subtitle style Chapter 8 Networks and Communication Department

  2. Multiplexing • Multiplexing allows several transmission sources to share a larger transmission capacity. • multiple links on 1 physical line • Most common use of multiplexing is in long-haul, high capacity, links • have FDM, TDM, STDM alternatives

  3. Multiplexing-Example

  4. Multiplexing • The multiplexer combines (multiplexes) data from the n input lines and transmits over a single data link(mdeium). • The demultiplexer separates (demultiplexes) the data according to channel, and delivers data to the appropriate output lines.

  5. 1)Frequency Division Multiplexing • can be used with analog signals. • A number of signals are carried simultaneously on the same medium

  6. Frequency Division Multiplexing • can be used with analog signals • Put different signals on different frequency bands using modulations. • each signal is modulated onto a different carrier. • All the modulated signals are combined to form a composite signal for transmission. • signals are carried simultaneously on the same medium • To prevent interference, the channels are separated by guard bands, which are unused portions of the spectrum. • A general case inFigure 8.2a. Six signal sources are fed into a multiplexer, which modulates each signal onto a different frequency (f1, …, f6).

  7. FDMSystem Overview1

  8. FDM System Overview2

  9. Wavelength Division Multiplexing • FDM with multiple beams of light at different freq • carried over optical fiber links • The light streaming through the fiber consists of many colors, or wavelengths • architecture similar to other FDM systems • multiplexer combine laser sources for transmission over single fiber • Optical amplifiers amplify all wavelengths • Demux separates channels at the destination

  10. Wavelength Division Multiplexing

  11. 2)Synchronous Time Division Multiplexing • can be used with digital signals or analog signals carrying digital data • data from various sources are carried in repetitive frames. Each frame consists of a set of time slots, and each source is assigned one or more time slots per frame

  12. TDM SystemOverview Interleaving at the bit level or in blocks of bytes

  13. TDM System Overview

  14. Framing • added digit framing • one control bit added to each TDM frame • identifiable bit pattern used to control channel • eg. alternating 01010101…unlikely on a data channel • compare incoming bit patterns on each channel with known sync pattern

  15. Pulse Stuffing • have problem of synchronizing data sources • with clocks in different sources drifting • also issue of data rates from different sources • Pulse Stuffing a common solution • have outgoing data rate (excluding framing bits) higher than sum of incoming rates • stuff extra dummy bits or pulses into each incoming signal until it matches local clock • stuffed pulses inserted at fixed locations in frame and removed at demultiplexer

  16. in Synch TDM many slots are wasted Statistical TDM allocates time slots dynamically based on demand each slot carries an address as well as data. multiplexer scans input lines and collects data until frame full may have problems during peak periods must buffer inputs Statistical TDM

  17. Statistical TDM

  18. Summary • Multiplexing multiple channels on a single link • FDM • TDM

More Related