1 / 9

PPPL: CAD Development of Modular Coils

July 21, 2003. PPPL: CAD Development of Modular Coils. 1.5. Surface A. 1.0 nominal. 1.5. Surface B. 6.664. .31 x .38 VPI groove. 2.664. 1/8 foam layer. 5.0. 1.675 x 4.671 winding pack. 4.671. clamp. 1/8 VPI layer. 4.1. 1. 5.1. 2. Modular Coil - C (13).

acton
Download Presentation

PPPL: CAD Development of Modular Coils

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. July 21, 2003 PPPL:CAD Development of Modular Coils

  2. 1.5 Surface A 1.0 nominal 1.5 Surface B 6.664 .31 x .38 VPI groove 2.664 1/8 foam layer 5.0 1.675 x 4.671 winding pack 4.671 clamp 1/8 VPI layer 4.1 1 5.1

  3. 2

  4. Modular Coil - C (13) Modular Coil - B (12) Modular Coil - A (11) 3

  5. Interference Concerns This collision should be able to be avoided with a tweak to the surface Since there is no “Wing” in this area we’ll have an extra 1.5” to work with 4

  6. Modular Coil - A (11) 5

  7. Modular Coil - B (12) 6

  8. Modular Coil - C (13) 7

  9. Winding-Clamp Concern Areas 8

More Related