1 / 22

CAD/CAE Data Exchange and Geometry Cleanup (Virtual Geometry)

CAD/CAE Data Exchange and Geometry Cleanup (Virtual Geometry). Introduction. Several translation methods available to enable data exchange with CAD/CAE systems. Appropriate approach depends upon source. Translation can: return incomplete, corrupt, or disconnected geometry

Thomas
Download Presentation

CAD/CAE Data Exchange and Geometry Cleanup (Virtual Geometry)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CAD/CAE Data Exchangeand Geometry Cleanup(Virtual Geometry)

  2. Introduction • Several translation methods available to enable data exchange with CAD/CAE systems. • Appropriate approach depends upon source. • Translation can: • return incomplete, corrupt, or disconnected geometry • return geometry details unnecessary for CFD analysis • Geometry cleanup refers to processes required to prepare geometry for meshing. • Fix incomplete or corrupt geometry and connect disconnected geometry • Remove unnecessary details • Decompose geometry into meshable sections • Gambit’s Virtual Geometry operations can help with the cleanup process.

  3. CAD Data Exchange - Direct Options • Direct Translation Options • ACIS-based CAD programs: • e.g., AutoCad, Cadkey, TurboCad • can export ACIS files (.sat or .sab) which can be imported into Gambit. • Parasolids-based CAD programs: • e.g., Unigraphics, SolidWorks, PATRAN, ANSYS • can export Parasolid files (.x_t and .xmt_txt) which can be imported into Gambit. • CAD programs using proprietary geometry kernel • e.g., I-DEAS, Catia, Pro-Engineer, CADDS • Direct (single-stage) translators purchase from third party vendor • e.g., Catia/ACIS translator • see spatial.com website for more information

  4. CAD Data Exchange - Standard Options • Standard Translation Options • Translation uses an intermediate, neutral or standard, file format. • Applicable for all CAD/CAE systemsthat can output: • STEP files • Pro/E supports STEP export at no additional cost. • Other systems support STEP as add-on. • IGES files • Common format supported by most systems. • STEP (Standard for Exchange of Product model data) • International standard defining format for geometry and model information. • Gambit supports AP203 and AP214 • Preferred over IGES import

  5. CAD Data Exchange - Standard Options (2) • Standard Translation Options (continued) • IGES (Initial Graphics Exchange Specification) • Topology/connectivity information is lost when CAD programs export IGES surface data only. • e.g., faces associated with volume, etc. • implies that volumes must be recreated from imported faces (tedious) • Some CAD packages export IGES-solids as well as IGES-surfaces. • I-DEAS and CADDS • Topology/connectivity information maintained. • Gambit provides two options for IGES import • Spatial • Imported geometry comes in as all real, supports solids • Native (Fluent) • Original IGES translator, does not support solids • Trimmed surfaces come in as virtual geometry

  6. Import Mesh and Import CAD • Import Mesh and some Import CAD options result in faceted geometry. • Least preferred approach • Import/CAD Pro/E (Direct) • Gambit directly accesses Pro/E’s geometry engine • Eliminates geometry translation losses • User works in Gambit environment • Need special Gambit and valid Pro/E license • Solid models alone are supported • assemblies are not

  7. Check and Heal Real Geometry • Geometry imported from other CAD systems can lack the required accuracy and precision to render valid or connected ACIS geometry. • This results from numerical limitations in original CAD system or neutral file formats, or differences in tolerances between CAD systems and ACIS. • Use visual inspection and check command to verify integrity of geometry/topology. • Fix geometry problems by healing if real geometry. • Healing can be invoked at time of import. • Fix topology problems by deleting and reconstructing entities with virtual geometry. • Connect disconnected geometry using healer or virtual geometry operations. • Healing corrects tolerance problems in the model and attempts to connect coincident edges and form volume from connected faces. • If unsuccessful, resort to virtual geometry operations.

  8. Virtual Geometry • Three kinds of geometry in GAMBIT: • Real • Defined by the ACIS library of geometry creation/modification routines. • Geometry defined by mathematical formulae. • Virtual • A Fluent Inc. library of routines providing additional functionality by redefining topology. • Derive their geometrical descriptions by references to one or more real entities (called the Hosts). • Faceted geometry • Treated like virtual geometry. • Derived from importing a mesh or faceted geometry into GAMBIT, split mesh operations, or stairstep meshing scheme. Two objects that share the same underlying geometry but different topologies.

  9. Virtual Geometry: Uses • Virtual geometry and the operations that create them are used to simplify, clean, and connect existing geometry. • Simplify/Clean: • remove details from the model unnecessary for CFD analysis. • merge faces/edges to increase mesh quality. • decompose geometry into smaller, meshable components. • Connect: • Connect geometry that becomes disconnected during import process. • Virtual geometry provides additional flexibility in operations that affect geometry and mesh. • Merges edges to enable non-coplanar face to be created. • Modify the mesh by repositioning nodes on virtual face.

  10. Creating Virtual Geometry • In general, virtual geometry is created as a result of a virtual geometry operation on a real entity. • Can also be created from a ‘native’ IGES import operation. • Virtual geometry operations: • are accessed: • by selecting virtual option on a real geometry panel and • through dedicated virtual operation panels. • employ any combination of real, virtual, and/or faceted entities. • result in the creation or modification of virtual (typical) and real entities. • Some real geometry operations will not work with virtual geometry. • e.g., boolean operations and some split operations will not work with virtual geometry • Take care when planning to use virtual geometry operations.

  11. Characteristics • Virtual entities: • entities are colored differently from real entities. • naming convention: v_vertex, v_edge, v_face, v_volume. • When performing a virtual geometry operation: • Directly connected lower and upper geometry will become virtual • Underlying real geometry (host) will become invisible and inaccessible (or put in the “background”) • Deleting virtual geometry: • Will not delete host geometry. • Typically, lower order entities (virtual) remain undeleted. • Meshing and Boundary Assignments: • Meshing and boundary assignment operations are unaffected by virtual geometry.

  12. Virtual Geometry Operations-1 • Merge - replaces two connected entities with a single virtual entity • Split - partitions an individual entity into two separate, connected virtual entities (recall: a real face can only be split with another real face) • Connect - combines two individual, unconnected entities such that the lower geometry is shared at common interfaces (unrestricted by ACIS tolerances) Example: + + Example: + + Example:

  13. + + + + between these faces collapse this face Virtual Geometry Operations-2 • Create - creates independent virtual entities • Use host entities for shape definition • Collapse - splits a face and merges the resulting pieces with two or more neighboring faces

  14. Virtual Geometry Operations-3 • Convert - converts non-real entities to real • Applicable to vertices, edges, faces, and volumes. • Edges are sampled and real spline (NURBS) curve generated. • sampling controlled by geometry.edge.VIRTUAL_NUM_SAMPLING_POINTS • Face conversions require that a map mesh first be generated on face (no Side vertices allowed). • Volume conversions require that all lower topologies can be converted • Topology and any existing mesh are preserved. • Face Simplify • Removes dangling edges and hard points from a face. • Result is virtual face

  15. + + + + + Edge/Face Merge • Virtual Edge/Face Merge options • Virtual (Forced) • Create one single edge/face from all edges/faces face merge edge merge + + • Virtual (Tolerance) • Merge all entities shorter than Max. Edge/Face Length • Merge all entities of higher entity angle than Min. Angle • No input will merge all vertices connected to two edges only max. edge = min. angle = 135

  16. + + Face and Volume Splits (Virtual and Faceted) • Virtual Face and Volume Splits • Face Splits • Using two vertices • Using an edge • Note: Faceted faces can be split withother faceted faces • Volume split (with face) • All edges of the face have to be connected to the volume connected face virtual volume split one volume two virtual volumes

  17. Edge Connect (Virtual) • Edge Connect • Also available in Vertex and Face • Virtual (Forced) • Pick two or more edges you want to connect • Virtual (Tolerance) • Every picked edge within the tolerance will be connected • 10 % of shortest edge is recommended (default) • The shortest edge is shown by clicking the “Highlight shortest edge” button • The shape of the connected edge is aninterpolated ‘average’ of the picked edges. • Use Preserve first edge shape to force result toassume shape of first edge in pick list. • Preserve first vertex location is available for vertex connects.

  18. Invoking too early may result in very small edges unconnected real edges/faces connected virtual edges/faces Edge Splits T-Junctions Option • T-Junctions - splits edges by vertices that exist within a specified tolerance of the edges and then connects the split entities. • Use Preserve split-edge shape option to get following result: Option On Original Option Off

  19. tolerance Merge Connect Unite Comparison of Face Unite, Merge, and Connect • Unite • Operates on real geometry • Faces must have equal tangents at edge • No unite for edges • Merges • Operates on real/non-real geometry  virtual • Faces must share edge but they need not be tangent • Connect • Operates on real/non-real geometry  real or virtual • Replaces selected entities with single entity

  20. Importing IGES Files • File  Import  IGES • Summary • Review important information in the form before importing the file. • Validity of information varies. • Options • Native or Spatial Translator • Ability to scale the IGES file at import (Scale model between the dimensions of 1e-6 and 1e+4, preferably around 1) • Remove stand alone entities • Virtual Cleanup • Enables automated cleanup sequence using: • connect tolerance • edge merge tolerance • angle merge tolerance • geometry.edge.VIRTUAL_MERGE_MIN_ANGLE

  21. Virtual Geometry Cleanup Strategy-1 • 1. Delete all unnecessary geometry • 2. Check validity of imported geometry • 3. Correct invalid geometry (Heal and/or reconstruction) • 4. Check connectivity by color coding • Helps distinguish between connected and unconnected entities. • White - Stand-alone entities • Orange - Unconnected faces (Edge connected to one Face) • Dark Blue - Connected faces (Edge connected to two Faces) • Light Blue - Multiple connections (internal Face) • 5. Connect Geometry (can be automated using Virtual Cleanup option) • a. Merge edges based on length and angle tolerances to eliminate short edges. • b. Real/Virtual connect of vertices, edges, and faces, in steps, based on increasing connect tolerance • c. Connect with T-Junction Option. • d. Use forced connect operation for entities out of tolerance

  22. Merge example: Virtual Geometry Cleanup Strategy-2 • 6. Create additional geometry, if necessary, and form volume. • Some of this may need to be done before resorting to virtual geometry commands so that real boolean operations are available. • Bridge real and existing virtual geometry together using virtual geometry. • In 3D, use face stitch command to create virtual volumes. • 7. Simplify faces • Merge small edges and faces with neighbors to eliminate • Remove sharp angles for better meshing. • 8. Decompose volume, if necessary. • 9. Mesh

More Related