Download
1 / 3
30 likes | 52 Views
Labels to identify companies require creativity and technique to be installed correctly. Tips for a correct assembly. Office Lobby signs are an essential part of any company. The outer signs, the main business presentation card.
E N D
Labels to identify companies require creativity and technique to be installed correctly. Tips for a correct assembly. Office Lobby signs are an essential part of any company. The outer signs, the main business presentation card. For these reasons, the styles of letters of the market are very varied. Manufacturers offer acrylic, plastic - flat or thermoformed - letters in metal with different finishes and even painted according to the color of the mark. Assembly of the letters is a task that requires special attention, since the installation must be safe enough to ensure that the characters are kept in place. There are different methods, such as "Mounting with adhesive", which is a simple type of installation, recommended for light letters, preferably plastic or some light material, or for walls where holes can not be made. Then there is the "Screwed Mount", in which the metallic letters that by their nature are heavier, need to be installed by screws that achieve a much stronger adhesion. This technique can also be used for acrylic letters of considerable thickness. In turn, the "Combined Assembly" is advised for its security, easy application in almost any type of letter. Another way to do the assembly is by placing small plastic pieces in the shape of an "L". A different alternative to place signs is to install a kind of plastic square on the back of the characters to allow the letters to stand alone at an angle Of 90 ° with respect to the base. Guide It must be taken into account that when the installation is to be performed on an irregular surface, such as corrugated metal, it is advisable to carry out a rail mounting, which consists of installing the letters on two horizontal acrylic bars, in order to obtain a single piece With all the letters, instead of having each character separately. With this technique will be easier to install the entire sign, taking care as always the leveling. It is worth remembering some tips to avoid problems during the installation. Clean and prepare the surface; Guiding with a template; Use a bubble level (to check the correct position of each letter); Tape back; Fix the template with tape to prevent it from moving when marking the holes; And check the orientation of the letters before installing them.
