SYNERGY
Download
1 / 29

SYNERGY ® V Models RT-U62CD Remote Control Training - PowerPoint PPT Presentation


SYNERGY ® V Models RT-U62CD Remote Control Training M1 SYNERGY ® V … Combines NEW programming, features & functionality! Overview 5-Device Universal / DVR Remote Control Cable - Digital Motorola – DCT ® Scientific Atlanta – Explorer 8000 ® SARA (RT-U60C)

Related searches for SYNERGY ® V Models RT-U62CD Remote Control Training

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha

Download Presentation

SYNERGY ® V Models RT-U62CD Remote Control Training

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Slide1 l.jpg

SYNERGY® V

Models RT-U62CD

Remote Control Training

M1

SYNERGY® V … Combines NEW programming, features & functionality!


Overview l.jpg
Overview

  • 5-Device Universal / DVR Remote Control

  • Cable - Digital

    • Motorola – DCT®

    • Scientific Atlanta – Explorer 8000®

      • SARA (RT-U60C)

      • Passport® (RT-U62CP)

    • Pioneer - Voyager®

    • Pace

      • 510 Digital Home Terminal

      • HD

  • TV

  • VCR

  • DVD

  • Audio – Receivers, amplifiers, CD players


Features l.jpg
Features

  • Point and Press® Programming

    • Lets you program your TV, VCR, DVD, AUDIO devices without codes

    • For programming information, go to the Point and Press® Programmingslide

  • Mode-Lock™

    • [MODE] button indicates which device (ex: CBL, TV, VCR, DVD, AUDIO) the remote

      is currently operating by illuminating the power button

    • For information on using the [MODE] button, go to the the Transport Functionslide

  • [ALL] SmartKey®

    • Turns Cable set-top terminal & TV on / off with one button press

    • Can also be programmed to turn on / off additional devices and / or tune TV to

    • correct TV output channel (3, 2, 4)

    • Resets remote to Cable mode

    • For programming information, go to the [ALL] SmartKey®slide


Features cont l.jpg
Features – cont.

  • Channel Memory Buttons

    • Tune up to 5 favorite channels on @ of [M1]

    • Resets transport (play, stop, fwd…) buttons back to Cable mode

    • For programming information, go to the Channel Memory Buttonslide

  • [Input]

    • Supports Cable function in Cable mode

    • Can be programmed to operate TV or VCR Input in Cable mode

    • For programming information, go to the Inputslide

  • Reset Feature

    • Two resets allow remote to be reset to factory defaults

      • Partial – Resets SmartKeys®, Vol / Mute, TV / VCR / DVD / AUDIO setup codes,

      • Mode-Lock™

      • Total – Resets all programmable features

    • For programming information, go to the Reset slide


Features cont5 l.jpg
Features – cont.

  • Memory Guard®

    • Permanent code retention capability

    • Eliminates reprogramming after battery changes

  • Low Battery Indication

    • When batteries become low, [CBL] will blink 2-times when any button is pressed

  • Time Out

    • Automatically shuts off remote if same button pressed / held for 45-seconds

    • Extends battery life


Slide6 l.jpg

SYNERGY® V remote can be programmed in 2-ways

Code-Entry Programming

Enter multiple 3-digit codes until device turns off

Simpler, faster “code-entry” method than OEM model

Point and Press® Programming

Simplified “Auto Search”

Press and hold [CH +] until device turns off

Eliminates codes

Great for programming unknown brands

Programming instructions on battery cover

Methods of Programming


Slide7 l.jpg

Programming Cable Set-Top Terminals

  • SYNERGY® V is pre-programmed for the Motorola DCT® digital cable set-top terminal

  • To program an SA Explorer® cable set-top terminal…

  • 1. Turn on Cable set-top terminal

  • 2. Press [OK], then [MUTE] together until power / mode buttons illuminate in

  • slow-rotation (i.e. CBL → TV → VCR → DVD → AUDIO → CBL…)

  • 3. Enter [4,1,2] or [4,1,3]. The SA set-top terminal will turn off

  • 4. Press [OK] to lock in code. The power / mode buttons will blink 3-times and

  • go out.

  • **** Can not use Point & Press® Programming for Cable devices ****


Slide8 l.jpg

1. Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want the remote to operate

2. Press [OK], then [MUTE] together until power / mode buttons illuminate in slow-rotation (ex: CBL 

TV  VCR  DVD  AUDIO  CBL…)

3. a. To program TV, locate the 3-digit code for your brand in the TV Setup Code list and enter it on the

keypad of the remote. Entry of the correct code will cause the TV turn off. If multiple codes are listed for your brand, you may have to try several different codes until TV turns off

b. As soon as you have entered a 3-digit code that turns your TV off, press [MUTE]

1. If TV turns back on, press [OK] to lock in code. The power / mode buttons will blink 3-times

and go out

Or

2. If TV does not turn back on, continue entering 3-digit setup codes until TV turns back on. Then

press [OK] to lock in code. The power / mode buttons will blink 3-times and go out

** To program VCR or DVD or AUDIO equipment, refer to the VCR or DVD or AUDIO Setup Codes

lists and repeat steps 2. and 3. above **

** After setup code is locked, press [MODE] button to see device / mode that was just programmed **

Programming TV, VCR, DVD, AUDIO Devices

Code-Entry Method


Slide9 l.jpg

The Point & Press AUDIO) you want the remote to operate® Programming method allows you to program your TV, VCR, DVD and

AUDIO deviceswithout using codes

Instead, using a command (for example [CH +] or [CH -] on next slide) that you select, the remote automatically finds the correct code for your electronic device

When programming using this method, the order you program your electronic devices is not important

While the remote is searching for the correct setup code(s) for your electronic devices, it’s possible that previously-programmed devices may turn off. If this occurs, continue pressing the [CH +] or [CH -] buttons until you find the code for the device being programmed

When programming the remote using this method, it may take several minutes for the remote to search through its entire code library for the correct code that turns the device you are programming on / off

For additional programming information, refer to the RT-U62CD Instruction Manual.

Point and Press Programming® (Auto-Search)


Slide10 l.jpg

1. Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want the remote to operate.

2. Press [OK], then [MUTE] togetheruntil power / mode buttons illuminate in slow-rotation (ex: CBL  TV  VCR  DVD  AUDIO  CBL…)

3. Press and hold [CH +] button until one device turns off. While pressing [CH +], the power / mode buttons will illuminate in fast-rotation. As soon as one device turns off, release [CH +]

4. Press [MUTE]. If the device that turned off…

a.Turns back on, press [OK] to lock in this code. The power / mode buttons will blink 3-times and go out

Or

b. Does not turn back on, press [CH -] one step at at time until that device turns back on. Each

time you press [CH -], the power / mode buttons will illuminate once in reverse fast-rotation

(AUDIO  DVD  VCR  TV  CBL)

Once you have found a code that turns the first device on/off, press [OK] to lock in code The power / mode buttons will blink 3-times and go out

** Repeat steps 2 – 4 above for remaining devices you wish to program remote to operate **

** After setup code is locked, press [MODE] button to see device / mode that was just programmed **

Programming TV, VCR, DVD, AUDIO Devices

Point & Press Programming®

(Auto-Search Method)


Slide11 l.jpg

Programming TV / VCR Combination Device AUDIO) you want the remote to operate.

1. First, turn on our TV / VCR combination device and install a VHS tape

2. Next, program your remote to operate the TV functions

Using the Code Entry Programming method described in the previous slide, find a TV Setup Code that operates the TV functions (Power, Vol + / - , Mute) of your TV / VCR combination device

3. Last, program your remote to operate the VCR functions

Using the Code Entry Programming method described in the previous slide,

enter, lock and test each 3-digit VCR Setup Code for your brand until a code

is found that operates the transport functions (play, stop, rew, fast-fwd,

pause, rec) functions of your TV / VCR combination device


Slide12 l.jpg

Programming TV / DVD or TV / VCR / DVD Combination Device AUDIO) you want the remote to operate.

1. First, turn on our TV / DVD combination device and install a DVD

2. Next, program your remote to operate the TV functions

Using the Code Entry Programming method described in an earlier slide, find a TV

Setup Code that operates the TV functions (Power, Vol + / - , Mute) of your TV / VCR

combination device

3. Last, program your remote to operate the DVD functions

Using the Code Entry Programming method described in an earlier slide, enter, lock and

test each 3-digit DVD Setup Code for your brand until a code is found that operates the

transport functions (play, stop, rew, fast-fwd, pause, rec) functions of your TV / DVD

Combination device. See NOTE below.\

4. If you have a TV / VCR / DVD combination, you would now program your remote to operate the VCR functions

Using the Code Entry Programming method described in an earlier slide, enter, lock and

test each 3-digit VCR Setup Code for your brand until a code is found that operates the

transport functions (play, stop, rew, fast-fwd, pause, rec) functions of your

TV / VCR / DVD combination device. See NOTE below

Note: Before you can test for the correct DVD or VCR setup code, you must first press [MODE], then DVD or [MODE], then [VCR] to put the remote into its DVD or VCR Mode.


Slide13 l.jpg

[ALL] SmartKey AUDIO) you want the remote to operate.®

  • Turns Cable and TV on / off with one button press

  • Can be programmed to turn on / off additional devices and tune TV to correct TV output channel (ex: 2, 3, 4)

  • Resets remote to Cable mode

  • When using the [ALL] button, be sure to keep the remote aimed at all the electronic devices until the electronic devices turn on / off


Slide14 l.jpg

Programming [ALL] SmartKey AUDIO) you want the remote to operate.®

  • 1. Press [ALL], then [SETTINGS] together until the [CBL] button illuminates

  • 2. Enter one of the following options on the keypad of the remote…

  • Option Pre-Programmed to turn on / off…

  •  [0] CBL + TV (default setting)

  • [1] CBL + TV & tune TV to Ch 03

  • [2] CBL + TV & tune TV to Ch 02

  • [3] CBL + TV & tune TV to Ch 04

  • [10] CBL + TV + VCR + DVD

  • [4] CBL + TV + VCR + DVD & tune TV to Ch 03

  • [5] CBL + TV + VCR + DVD & tune TV to Ch 02

  • [6] CBL + TV + VCR + DVD & tune TV to Ch 04

  • [11] CBL + TV + VCR + DVD + AUDIO

  • [7] CBL + TV + VCR + DVD + AUDIO & tune TV to Ch 03

  • [8] CBL + TV + VCR + DVD + AUDIO & tune TV to Ch 02

  • [9] CBL + TV + VCR + DVD + AUDIO & tune TV to Ch 04

  • [12] CBL + TV + AUDIO

  • [13] CBL + TV + AUDIO & tune TV to Ch 03

  • [14] CBL + TV + AUDIO & tune TV to Ch 02

  • [15] CBL + TV + AUDIO & tune TV to Ch 04

  • 3. As soon as you select an option, the [CBL] button will blink 3-times and go out


Slide15 l.jpg

Channel Memory Button - [M1] AUDIO) you want the remote to operate.

  • Can be programmed by user to store up to 5 channels

  • When pressed, reset operation of “transport” (play, stop, rew) buttons back to Cable for “seamless” VOD operation

  • Great for programming “premium” channels, categories

  • Can be set to tune VOD “barker” / access channel, thus simplifying VOD usage / purchases

  • Can help generate new revenue-streams


Slide16 l.jpg

Programming Channel Memory Button - [M1] AUDIO) you want the remote to operate.

1. Press [M1], then [CBL] together until the [CBL] button illuminates

2. Enter each channel as follows (ex. assumes 4-digit channel format)…

a. Enter 1st channel # - 0001

b. Press [CH +] to advance to next channel # setting

c. Enter 2nd channel # - 0012

d. Press [CH +] to advance to the next channel # setting

e. Enter 3rd channel # - 0123

f. Press [CH +] to advance to the next channel # setting

g. Enter 4th channel # - 1234

h. Press [CH +] to advance to the next channel # setting

i. Enter 5th channel # - 0017

3. Press [M1] to store the above channels. The [CBL] button will blink 3-times and go out.

[M1] can be pressed any time after a, c, e, g, i above to store fewer channels


Slide17 l.jpg

Using Channel Memory Button - [M1] AUDIO) you want the remote to operate.

  • Following example from previous slide…

    • 1. Press [M1] - Cable set-top terminal tunes to Ch 1

    • 2. Press [M1] again - Cable set-top terminal tunes to Ch 12

    • 3. Press [M1] again - Cable set-top terminal tunes to Ch 123

    • 4. Press [M1] again - Cable set-top terminal tunes to Ch 1234

    • 5. Press [M1] again - Cable set-top terminal tunes to Ch 12345

    • 6. Press [M1] again - Cable set-top terminal tunes to Ch 1…repeat

  • When pressing [M1], be sure to keep remote aimed at your Cable set-top terminal to ensure full channel #s are received in their entirety

  • Pressing [M1] also resets transport (play, stop, rew…) buttons back to Cable mode


Slide18 l.jpg

Volume Control AUDIO) you want the remote to operate.

  • When you first program the remote, volume / mute are controlled through your TV (except AUDIO, which defaults to the AUDIO device)

  • Volume control options in each mode of the remote are…

    CBLTV (default), Cable or Audio

    TVTV (default), Cable or Audio

    VCRTV (default), Cable or Audio

    DVD TV (default), Cable or Audio

    AUDIOAUDIO device (default), Cable or TV

  • To control volume / mute on Cable set-top terminal…

    1. Press [CBL], then [OK] together until the [CBL] button illuminates

    • 2. Press [VOL + ], then [CBL] for Cable volume. The [CBL] button will blink 3-times and go out

  • To return volume control to TV, repeat step 1, then press [VOL+], then [TV] in step 2


  • Slide19 l.jpg

    Code Number Readback AUDIO) you want the remote to operate.

    • To identify the 3-digit TV code stored under the Point and Press® Programming method…

      1. Press [TV], then [OK] together until the [TV] button illuminates

      • 2. Press [INFO]

      • 3. The [TV] button will “blink back” the code number, with a 1-second interval between the digits

    • Ex: For TV code “035” the [TV] button will blink 10-times, then 3-times, then 5-times

  • To identify the 3-digit VCR code, press [VCR], then [OK] together in step 1, then press

    [INFO]

  • To identify the 3-digit DVD code, press [DVD], then [OK] together in step 1, then press

    [INFO]

  • To identify the 3-digit AUDIO code, press [AUDIO], then [OK] together in step 1, then press [INFO]


  • Slide20 l.jpg

    Input AUDIO) you want the remote to operate.

    • In the remote’s Cable mode, the [INPUT] button normally operates a Cable function

    • To program [INPUT] to operate the TV Input function in Cable mode…

      1. Press [INPUT], then [OK] together until the [CBL] button illuminates

      2. Press [TV]. The [CBL] button will blink 3-times and go out

    • To program [INPUT] to operate the VCR Input (TV / VCR) function in Cable mode…

      1. Press [INPUT], then [OK] together until the [CBL] button illuminates

      2. Press [VIDEO]. The [CBL] button will blink 3-times and go out

    • To reset [INPUT] to its normal Cable function in Cable mode…

      1. Press [INPUT], then [OK] together until the [CBL] button illuminates

      2. Press [CBL]. The [CBL] button will blink 3-times and go out


    Slide21 l.jpg

    Reset AUDIO) you want the remote to operate.

    • Partial Reset returns some of your remote’s features to their default settings…

      1. Press [CBL], then [OK] togetheruntil the [CBL] button illuminates

      2. Press [SETTINGS], then [SETTINGS] again. The [CBL] button will blink 3-times and go out

      Note: Partial Reset returns ALL SmartKey®, Vol / Mute, Mode-Lock™, Video Source and TV / VCR / DVD / AUDIO codes to factory default settings

    • Total Reset returns of ALL of your remote’s features to their default settings…

      1. Press [CBL], then [OK] together until the [CBL] button illuminates

      2. Press [SETTINGS], then [MENU] again. The [CBL] button will blink 3-times and go out

      Note: Total Reset returns ALL SmartKey®, Vol / Mute, Mode-Lock™, Video Source, Channel Memory Buttons, Cable setup code, TV / VCR / DVD / AUDIO codes to factory default settings


    Slide22 l.jpg

    Programming Tips AUDIO) you want the remote to operate.

    • Always read the instructions before programming

    • Remotes consume more power in a programming mode than during normal operation. If remote will not let you program, batteries could be old. Install new batteries

    • Remote operates slower in a programming mode. Press buttons slowly, carefully, and in the order indicated

    • The LEDs will remain illuminated when the remote is in a programming mode. If you don’t start programming within 45-seconds, the LEDs will go out

    • Be sure to press the [OK] button to lock in a device once you have found the correct setup code

    • When programming your remote, the [MUTE] button is used to confirm the correct setup code has been entered


    Slide23 l.jpg

    Programming Tips (cont.) AUDIO) you want the remote to operate.

    • For the majority of TVs, VCR, DVDs, pressing [MUTE] during programming will turn the device you are programming back on. However, due to their electronic design, some brands (I.e. Philips) may not turn back on when the [MUTE] button is pressed during programming

    • If this happens, simply press the [OK] button to lock in the code that was just entered. Then press the [TV] button to see if the TV turns on. If the TV turns on, the correct code has been entered

    • For brands such as Philips, the recommended programming steps are as follows:

      1. Turn on the TV

      2. Press [OK] + [MUTE] together until the power / mode buttons illuminate in sequence

      3. Locate and enter the 1st setup code listed for your brand

      4. Press [OK] to lock in the code

      5. Press [TV]. If the TV….

      a. Turns on or off, the correct code has been found

      b. Does not turn on or off, repeat steps 2, 3 and 4 above until you have locked in a code that turns the TV on & off


    Slide24 l.jpg

    Button Functions AUDIO) you want the remote to operate.

    Illuminate / select electronic device being operated. Press Mode, then…

    CBL - for Cable mode

    TV - for TV mode

    VCR - for VCR mode

    DVD - for DVD mode

    AUDIO - for Audio mode

    Access cable guide

    Moves through on-screen display or cable guide menu (,,,)

    Access on-screen display for cable device

    Functions set by cable operator

    (A, B, C)

    Day /  in cable guide

    Display Help screen on cable device

    Replay previous few seconds of program (DVR set-top terminals only)

    Listing of recorded programs (DVR set-top terminals only)

    Rewind DVR, VCR, DVD

    Stop DVR, VCR, DVD

    Change viewing aspect of cable device

    PIP on / off

    Swap PIP & and main screen

    Selects video source

    Channel memory button (may be labeled or pre-set by cable operator)

    CBL & TV on / off

    (programmable)

    Individual device on / off power

    Access on-screen display

    for cable device

    Display channel / program information

    Moves + / - through on-screen

    displays, cable guide

    Selects highlighted on-screen

    or cable guide choice

    Exit any on-screen display

    Recall pre-selected favorite

    channels

    Return to last selected channel

    Display live TV programming

    (DVR set-top terminals only)

    Fast-forward DVR, VCR, DVD

    Play DVR, VCR, DVD

    Record DVR, VCR

    Pause DVR, VCR, DVD

    Digital Music

    Move PIP screen

    PIP channel +/-

    Access Pay-Per-View

    programming where available

    Access Video-On-Demand programming where available

    M1


    Slide25 l.jpg

    Transport Functions AUDIO) you want the remote to operate.

    Transport Functions – CABLE Mode

    1. Press [Mode] (1), then [CBL] (2)

    2. Remote in Cable operating mode

    3. Transport (play, stop, rew) buttons (7) support Cable

    Video-On-Demand (VOD) functions as follows:

    Transport Functions – DVD Mode

    1. Press [Mode] (1), then [DVD] (5)

    2. Remote in DVD operating mode

    3. Transport (play, stop, rew) buttons (7) support

    DVD functions

    1

    2

    6

    5

    3

    4

    Transport Functions – TV Mode

    1. Press [Mode] (1), then [TV] (3)

    2. Remote in TV operating mode

    3. Transport (play, stop, rew) buttons (7) support

    VCR functions

    7

    Transport Functions – AUDIO Mode

    1. Press [Mode] (1), then [AUDIO] (6)

    2. Remote in Audio operating mode

    3. Transport (play, stop, rew) buttons (7) support

    Audio CD functions

    Transport Functions – VCR Mode

    1. Press [Mode] (1), then [VCR] (4)

    2. Remote in VCR operating mode

    3. Transport (play, stop, rew) buttons (7) support

    VCR functions

    M1


    Slide26 l.jpg

    Setup Codes – Cable Device AUDIO) you want the remote to operate.


    Slide27 l.jpg

    Setup Codes - TV, VCR, DVD, Audio Devices AUDIO) you want the remote to operate.

    • Refer to the Instruction Manual for the RT-U62CD for the set-up codes for the TV, VCR, DVD and Audio devices


    Slide28 l.jpg

    Mode-Lock™ AUDIO) you want the remote to operate.

    • Locked Mode (default)

      • Channel control (CH +/-, 0-9) “locked” to Cable set-top terminal

      • [CABLE], [TV], [VCR], [DVR], [AUDIO] - on / off for each device

      • [MODE] button operates as follows:

        • Illuminates current operating mode

        • Allows user to select different operating mode for “transport” (play, stop,

        • ff, rew, pause) functions.

        • Great for customer-service troubleshooting

    • Unlocked Mode

      • Channel control (CH +/-, 0-9) “unlocked” for multi-device (CBL, TV, VCR) channel

      • operation

      • [CABLE], [TV], [VCR], [DVD], [AUDIO] - on / off for each device

      • [MODE] button operable as follows:

        • Illuminates current operating mode

        • Allows user to select different operating mode for “transport” (play, stop,

        • ff, rew, pause) functions and channel control

        • Great for customer-service troubleshooting


    Slide29 l.jpg

    Locking / Unlocking Mode-Lock™ AUDIO) you want the remote to operate.

    • To Unlock Mode-Lock™

      • 1. Press [CBL], then [MUTE] together until [CBL] button illuminates

      • 2. [9, 9, 9]. The [CBL] button will blink 3-times and go out.

      • 3. Multi-device channel control - Cable, TV, VCR

    • To Lock Mode-Lock™

      • 1. Press [CBL], then [MUTE] together until [CBL] button illuminates

      • 2. [0, 0, 0]. The [CBL] button will blink 3-times and go out

      • 3. Single-device channel control - Cable


    ad
  • Login