A-1 Fence Mumbai manufactures chain link fence fabric in galvanized wire or PVC coated wire. Chain link can be supplied in variety of heights, and roll lengths. Mesh size of the chain link can vary from 25x25mm to 63x63mm. Complete chain link system along with powder coated posts and accessories are supplied.
A-1 Fence Products
Chain Link Fabric Description Woven wire usually made from galvanized or PVC coated galvanized steel wire. The wires run vertically and are bent into a zigzag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms characteristic diamond pattern seen in this type of fence.
Zinc coating on Barbed wire can vary from commercial grade to heavy gal (275 gsm).
A-1 also offers PVC coated barbed wire which further improves the life of the product. This product is usually offered with both the line wire and barb wire specification of core wire diameter 1.8mm and outer diameter 2.6mm.
Chain Link Fabric Typical SpecificationsWire Diameter: 2mm (14-1/2GA by BWG or 14GA by USG) to 4.2mm (8GA by BWG or 8-1/2GA by USG).Wire Tensile Strength: Wire Tensile is in the range of 35-55 Kgf/mm2
Zinc Coating: 40Gms to 610Gms (We must specify which ASTM standard does our coating adhere to)Mesh Size: 25mm to 75mmHeight: 900mm to 4000mmSelvage: Knuckled or Twisted.
Fabric with 2-in. [50.8mm] or 2-1/8-in. [54.0-mm] mesh, in heights less than 72 in [1829 mm], shall be knuckled at both selvages. Fabric 72 in. [1829 mm] high and over shall be knuckled at one selvage and twisted at the other. These are standard selvages. Other selvage combinations will be supplied only if specified by the purchaser.
Usually selvages for fabrics less than 2-in. [50.8mm] shall be knuckled at both edges.
Please visit us for our complete product range http://www.a-1fenceproducts.com/chain_link_system.htm