1 / 23

CE260 CH 1

land surveying

MouradOudir
Download Presentation

CE260 CH 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter #1: Basics of Surveying

  2. 1.1 Surveying Defined • What is surveying? Surveying is the art of measuring distances, angles and positions on or near the surface of the earth. • Why it is an art? Because only a surveyor who possesses through understanding of surveying techniques will be able to determine the most efficient methods required to obtain optimal results over a wide variety of surveying problems.

  3. Why it is scientific? Because the use of mathematical techniques to analyze field data, accuracy and reliability depends on understanding scientific principles underlying and affecting survey measurement.

  4. 1.2 Types of Surveying There are two types of surveying: Plane surveying:Earth surface is considered a plan of x-y dimensions. - Z-dimension (height) referenced to the mass spherical surface of the earth (MSL). - Most engineering and property survey are plane survey correction to curvature is made for long strips (Higher).

  5. Geodetic surveying:Earth surface is considered spherical in resolution (actually ellipsoid) x-y. for - Z is referenced to MSL (surface of earth) - Very precise surveys (boundaries and coastal networks).

  6. 1.3 Classes of surveys Preliminary survey:(data gathering ) is the gathering of data (distances, position and angles) to locate physical features (rivers, roads, structures) so that data can be plotted to scale (map or plan), also include diff. in elevation so that contour could be plotted.

  7. Layout survey: Marking on the ground using sticks iron bar or concrete monuments. The features shown on a design plan features: - Property lines (subdivision survey). - Engineering work (construction survey). - Z-dimensions are given for x-y directions. Control survey: used to reference prelim and layout surveys. Horizontal control: arbitrary line tied to prop line or HWY center or coordinated control stations.

  8. Vertical control: Benchmarks: points whose elev. above sea level is carefully determined.- In Control survey more care to accuracy.- Control lines should be easy to re-establish.

  9. 1.4 Definitions 1- Topographic survey: preliminary surveys used to tie earth surface features. 2- Hydrographic survey: preliminary surveys tie underwater feature to surface control line 3- Route surveys:preliminary, layout and control surveys that range over a narrow but long strip of land (highways, railroads, electricity transmission lines and channels).

  10. 4- Property surveys: preliminary, layout and control surveys determine boundary locations for a new map. 5- Aerial survey:preliminary and final surveys convert aerial photograph into scale map using photogram metric tech. 6- Construction survey: layout of engineering work. 7- Final (as built) survey: preliminary surveys tie in features that just have been constructed

  11. 1.5 Surveying Instrument 1- Transit and theodolite: Establish straight or curved lines, horizontal and vertical angles. 2- The level and rod: measure difference in elevations. 3- Steel tape: measure horizontal and slope distances. 4- Total station. 5- GPS (global positioning system) receivers.

  12. Steel tape Level ( stadia principle ) Total station Thedilite GPS

  13. 1.6 Survey Geographic Reference Define reference as the surface of earth. Latitude: East/West //equator. - Max angle 90o north or south. Longitude (Meridians): North/South converge at poles & max angle = 180 degree east or west from the plane of 0o longitude Greenwich. - used in geodetic not plane survey. - Plane survey use coordinates grid system.

  14. 1.7SurveyGridReference States and provinces have adopted a grid system best suited to their needs. - Limited in size: no serious error due to curvatures. - Easy to use (plane geometry & trigonometry). - Common datum for x & y dimensions. - Easy to translate to geodetic survey.

  15. 1.9 Survey Vertical reference Vertical dimension can be referenced to any datum. - Mostly used datum is mean sea level MSL = 0.000 ft. - Benchmarks  permanent points whose elevation has been precisely determined.

  16. 1.10 Distance Measurements Distance between two points can be horizontal, slope or vertical and are recorded in feet (foot units) of meters (SI units). - Horizontal and slope distances can be measured by using fiberglass, steel tape or EDM (electronic distance measuring) + difference in elevation and slope distance. - Vertical distance can be measured by using tape as in construction work or level and leveling rod

  17. 1.11 Unit of Measurement There are two main measuring systems: English system and Metric system (SI units). - All countries will change to Metric system. - Angles are measured by: Degrees, minutes and seconds. - 1 revolution = 360 degrees, 1 degree = 60 minutes and 1 minutes = 60 seconds.

  18. 1.12 Location Methods B B B P P P C A A A - (a): right angle offset tie. - (b): the angle distance tie (polar tie). - (c): angle at A and B of distance BP of AP (intersection technique).

  19. 1.13 Accuracy and precision Accuracy: relationship between measure & true value of measurement. Precision: Degree of refinement with which the measurement is made. Example: True Distance Measured Distance Error Cloth tape 157.22 157.3 0.08 Steel tape 157.22 157.23 0.01 - More precise method resulted in more accurate. - More precise method may result in less accurate measurement. Example: Repaired tape.

  20. 1.14 Accuracy Ratio Error of closure: The difference between the measured location and the theoretical correct location (repeated measurement, mathematical analysis). Exp. measured distance 250.56 errors 0.06 Known distance 250.50 Accuracy ratio 0.06/250.50 = 1/4175 = 1/4200 - Fraction whose numerator is unity and denominator closest 100 unit.

  21. 1.15 Errors • - No measurement (except count) can be free of error. • True value is determined statistically (mean) to calculate error. • Systematic error: error whose magnitude and algebraic sign can be determined and eliminated (temp. error). • Random Error: • - Error due to surveyor skill. • - Tend to cancel each other. • - Little significance except for high precision survey. • - Unskilled or careless surveyor can make problem. • - Large random error doesn’t result in accurate work even if they cancel.

  22. 1.16 Mistakes There are many mistakes that cold be happened to surveyors. - Blunders made by survey personnel e.g. 68 instead of 86. - Miscounting tape length, measuring from wrong point. - Mistakes will occur and must be discovered and eliminated by verifying the measurement (Repeat Geometry analysis, etc.). - Every measurement should be repeated to eliminate mistakes and improved precision.

  23. 1.17 Stationing Along Baseline: stations or champagne At night angle: offset dist. Beg. 0+00 ft (m). 0+00 2+50 4+96 5+43.12

More Related