1 / 18

FTTP PON - The Critical Components and Their Impact on the Development of International Standards By Dr. Andre Girard

MikeCarlo
Download Presentation

FTTP PON - The Critical Components and Their Impact on the Development of International Standards By Dr. Andre Girard

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. FTTP PON - The Critical Components and Their Impact on the Development of International Standards By Dr. Andre Girard Co-Chair of TIA FO-4.3 Presented at FO-4.3.1 and FO-4.3

    3. FTTP PON - The Critical Components

    4. PON Passive Optical Components Splitter and Wide WDM Coupler The loss uniformity will be key for high port count splitterThe loss uniformity will be key for high port count splitter

    5. PON Passive Optical Components Classes of WDM Components

    6. Passive Optical Components Technology Breakdown Thin Films Gratings Bulk Optical Fiber Bragg Fiber-Based Fused Biconic Taper coupler Waveguides/PLC

    7. Passive Component Technologies Thin-Film Filters (TFF)

    8. Thin Film Filters 3-Port WWDM Coupler

    9. Passive Component Technologies Bulk Diffraction Gratings

    10. Passive Component Technologies Fiber Bragg Gratings

    11. Wide WDM Coupler

    12. Technology TFF BDG FBG

    13. PON Passive Optical Components Splitter Technology

    14. Planar Waveguide

    15. Technology FBTF PLC

    17. ITU-T SG15 Recommendations G.671 Transmission characteristics of optical components and subsystems IEC SC86B on Passive Components 61753-082-2: Fibre optic interconnecting devices and passive components performance standard–Part 082-2: Non connectorized single mode fibre optic pigtailed 1.31/1.55 mm WDM devices for category C – Controlled environment 62074-1: Fibre optic WDM devices–Part 1: Generic specification 61300-3-7: Basic test and measurement procedures–Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss Telcordia GR-1209 Generic Requirements for Fiber Optic Branching Components GR-1221 Generic Reliability Assurance Requirements for Fiber Optic Branching Components International Standards Passive Optical Components - Incomplete There are presently no standards at product level (TIA and IEC) that adequately cover the splitter and the Wide WDM coupler for specifications. The job will need to be doneThere are presently no standards at product level (TIA and IEC) that adequately cover the splitter and the Wide WDM coupler for specifications. The job will need to be done

    18. IEC 62074-1 and ITU-T G.671 Attenuation (Transfer Coefficients) Operating Wavelength Range Insertion Loss/Deviation X dB-Bandwidth Ripple Channel Non-Uniformity Free Spectral Range (FSR) Directivity Channel Response Time

    19. Broadband Source (BBS) - OSA BBS - Interferometer-based OSA (Wavemeter) Tunable Laser Source (TLS) - OSA Fixed set of wavelengths - Optical Power Meter (OPM) TLS – OPM Swept TLS - OPM

More Related