1 / 9

Wire Straightening and Cutting Machines Manufacturer

Logos weld is one of the leading welding electrode making machines and welding electrode machine manufacturers in India. We offer wide range of innovative welding electrode machineries.

Logosweldproducts
Download Presentation

Wire Straightening and Cutting Machines Manufacturer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How To Do Aluminum Welding?

  2. A lightweight, soft, low strength metal - aluminum can be easily cast, forged, machined and welded. In fact aluminum can be easily welded, brazed and soldered with other metals using conventional equipments and techniques. INTRODUCTION

  3. Tungsten Inert Gas Welder / TIG Welder • A tungsten electrode and an inert gas is used in this welding process. The inert gas is used to sheild the welding area. Though there are other welding processes too with which aluminum can be welded, TIG welding is comparitively easier and thus suits the new welders. Also the precision achieved with this type of welder if very important, especially when the aluminum sheets are very thin.

  4. Aluminum filler rod • With the help of aluminum filler rod you can easily bond the pieces of aluminum together – or aluminum with other metals. Logos Weld – leading Welding Electrode Plant- suggest total avoidance of use of rusty/ dirty filler rods. Dirty/ rusty filler rods will make the welds weak.

  5. Argon gas canister • This is used for shielding purpose. Pure argon is a time-tested cost-effective gas solution. To this solution you can also add 3% helium to increase arc stability. It is recommeded that you buy the gas from authorized dealers only. You can easily get it from most welding supply stores or can refer you to an outlet where you can buy the argon gas canister from.

  6. One needs to keep in mind that aluminum forms a thin coat of aluminum oxide on its exterior when melted at a higher temperature than aluminum. And this is why it is advised that you clean the aluminum piece before you start welding it. You can clean the aluminum by spraying the joints with acetone, rinsing the work piece in water and then leaving the sheet to dry thoroughly. It is recommeded that you scrub the aluminum with a stiff stainless steel brush to finish the cleaning process.

  7. Once the cleaning process is done, you need to preheat the piece of aluminum either directly in an oven or with a gas torch. Try to heat at a temperature of 176 degree celsius. Once heated, you need to fix the pieces together as tightly as possible.

  8. This is especially important in case of TIG welding, as if the pieces are not joined tightly then the joints would have many gaps. Now you need to set the amperage of your weld at about 1 amp/ .025 mm. of the aluminum's thickness. When this is done, you can start the welding process.

  9. Contact Us For more information on welding and Wire Straightening and Cutting Machines Manufactureryou can visit www.logosweld.com or call at +91 422 2934784.

More Related