1 / 12

Legislation

Legislation. Electricity Act 1992 plus amendments. Electricity Regulations 2003. AS/NZS 3000 wiring rules AS/NZS 3760: 2003 Inservice Safety Insp. & test. AS/ NZS 3012:2003 Con. & Demo sites. Electricity Regulations. Reg. 76(B) – AS/NZS 3760:2003

JasminFlorian
Download Presentation

Legislation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Legislation Electricity Act 1992 plus amendments Electricity Regulations 2003 • AS/NZS 3000 wiring rules • AS/NZS 3760: 2003 Inservice Safety Insp. & test. • AS/ NZS 3012:2003 Con. & Demo sites.

  2. ElectricityRegulations Reg. 76(B) – AS/NZS 3760:2003 Inservice Safety Inspection & testing Electrical Equipment Reg. 69(B)(d) – AS/NZS 3012:2003 Electrical installations – Construction & demolition sites.

  3. Standard AS/NZS 3012:2003 Applies to all construction & demolition sites.

  4. Key points - AS/NZS 3012:2003 • Support of cables entering switchboards –’flexible’. • All final sub-circuits protected by 30mA RCD’s. • Construction wiring must be separate to perm wiring. • Minimum flexible cord size 1.00mm2 • Leads – Protect from mechanical damage. • – Supported off the floor.

  5. Lighting Festoon lamps • Lampholder permanently moulded to cable. • Non-conductive, mechanical guard. • Supported at least 2.5m from the floor.

  6. Lighting - portable Portable lamps Must have a rating of IP2X or higher.

  7. Inspections • Prior to initial service • Where new, supplier to test & tag. • Before return to service after servicing or repair. • Can use an individual tag or register. • Competent person can carry out testing & tagging. • Only a registered person with a current practicing license can carry out electrical repairs. Testing & Tagging

  8. Testing & Tagging Table 2 • 3 Monthly – Portable equipment. • RCD’s – trip test daily before use. (portable gear) – monthly (fixed). • RCD’s testing every: – 3 months portable. – 12 months fixed.

  9. Testing & Tagging Sheds & switchboards. Require Certificate of compliance on completion of installation.

  10. Testing & Tagging - continued • Testing & tagging – visual inspections. • All electrical devices made to AS/NZS 3105 do not comply with AS/NZS 3012:2003.

  11. Testing & Tagging - continued Compliance Plug boxes • Jackson(comply) • PDL(comply) • Others do not currently comply with AS/NZS 2012. (domestic plug boxes)

  12. Thank You

More Related