How do people maintain and nurse the massage bathtub

1. How do people maintain and nurse the massage bathtub How do people maintain and nurse the massage bathtub Course: jazzispas Many people have sold wholesale sauna room or wholesale swim spa from acrylic bathtub manufacturers. But few recognize how to hold and nurse their bathtub well. Massage bathtub suppliers suggest that in order to extend the provider existence of your Jacuzzi, you want to pay attention to these things listed as follows. If there is any scratch on the surface of the Lazy Spa Jacuzzi, simply use dry sanding paper to grind it, then apply toothpaste on the bathtub, and in the end polish it with a gentle cloth will do. Factory Hot Tubs will be as new as before. You can also use light slightly heated acid detergent, such as lemon juice, vinegar to easy the scale of the bathtub surface. If the floor of the cylinder is a little dirty, it can be wiped with a moist towel and this system can be repeated three times. For the hydraulic friction device cleaning, all you want to do is to fill your Lazy Spa Jacuzzi with forty stages Celsius warm water, add 2 grams per liter of detergent, begin hydro-massage for about 5 minutes, give up pump drainage, then fill the bathtub with bloodless water, start hydro-massage for about 3 minutes and in the end pump drainage. What you should no longer do to your Factory Hot Tubs is also important. Do now not use hard utensils that comprise chemical solvents or particles to clean the surface of the cylinder and be aware no longer to use hard objects or sharps to strike the floor of the bathtub. At the equal time, it is advised to no longer to put cigarette butt or other heat sources above 70 tiers to contact the surface of the Factory Hot Tubs. One last essential factor is that after the usage of the bathtub, you are counseled to drain the water and disconnect the energy supply. If the water return device and nozzle are blocked by using hair and other debris, you can unscrew it and easy it separately. Note that gold-plated and chrome- plated components do not need to be wiped frequently.