What\'s VoIP gateway and what\'s IP PBX? And are there any functional differences between them? Read this article to know more information about it.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Voice conversations are relayed either as analog or as digital signals. VolP technology
makes it possible to encode voice into data packets which are then broken down into
smaller units and transmitted electronically. Functional difference is the best place to
begin VoIP gateway vs. IP PBX comparison.
In an IP PBX system, the conversation of the voice packets into data packets happens
at the source. That explains why IP PBX is often referred to as a native IP device. The
converted packets are typically sent as native IP packets and then reassembled once
received on the other end. The older PBX systems which do not have IP addresses
assume that the digital transmissions will happen independently or over the POTS
(Plain Old Telephone Service). On the other hand, any IP PBX has the ability of
translating data packets for the POTS infrastructure whenever needed, as is the case in
Another functional difference in VoIP gateway vs. IP PBX is how voice is broken
down for transmission. A typical VolP gateway works by breaking down the voice and
then stuffs the smaller segments into IP packets at the network node. These broken
down pieces are then transmitted over the IP network. The main difference in these
technologies is that the analog voice network assumes it will transmit the packets over
the POTS on the network. Meanwhile, the gateway breaks down the message into
digital packets ready for transmission on VolP. The biggest pro for a company using a
VoIP gateway vs. IP PBX is that the company can either have an easy upgrade path to
VolP or even have multiplicity of devices and use the gateway as a kind of translator.
Undertaking a complete PBX upgrade can be an expensive affair especially if cabling
has to be done as part of the upgrade. For instance, there are some VolP phones that
will need at least two cables. A good example of such phones is the power over
Ethernet phones. You could still improvise with a switch based phone but if all the
data connections on a workstation are engaged and you do not have the old voice
connection, you may want to upgrade to the new standards of a four pair cabling
A VolP gateway is arguably the most optimal solution for a network that wants to
adopt the voice over internet protocol. However, this could also depend on how much
depreciated the PBX switch is. For purposes of illustration, supposing you had a
company that was headquartered at point X that had just ventured into new territories
at pint Y and Z; it would be great to implement a VolP gateway at point X. The
gateway will interface between the two new cities and translate the messages sent
back to X from Y and Z. However, points Z and Y would still be able to communicate
directly without having to go through the gateway.
EZTalks is a leading provider of various solutions on voice over including video
conferencing software, voice over internet calls and whiteboards. With easytalks.com,
you can conveniently collaborate with your co-workers from any corner of the globe.
Visit us today and experience the difference!