1 / 8

CCNP Switch FAQ Preparing the Campus Infrastructure for Advanced Services

CCNP Switch FAQ Preparing the Campus Infrastructure for Advanced Services

Download Presentation

CCNP Switch FAQ Preparing the Campus Infrastructure for Advanced Services

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. www.ConfigRouter.com CCNP​​Switch​​FAQ​​:Preparing​​the​​Campus​​Infrastructure​​for​​Advanced​​Services Q1.​​When​​planning​​for​​access​​point​​deployments​​in​​a​​wireless​​LAN​​of​​a​​campus​​network,​​what are​​the two​​Cisco​​best-practice​​solutions? a.​​Standalone​​WLAN​​solutions​​(autonomous​​solutions) b.​​Network-based​​WLAN​​solutions c.​​Controller-based​​WLAN​​solutions d.​​Internet​​router-based​​WLAN​​solutions Answer:​​Answer:​​A​​and​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q2.​​What​​video​​applications​​are​​driving​​video​​deployments​​in​​the​​campus​​network? a.​​TelePresence b.​​Remote​​training​​and​​learning c.​​Virtual​​classrooms d.​​Video-on-demand Answer:​​A http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q3.​​In​​a​​controller-based​​WLAN​​solution,​​which​​device​​does​​all​​the​​traffic​​flow​​through​​when communicating​​between​​wireless​​nodes? a.​​WLSE b.​​RADIUS​​server c.​​WLC d.​​WCS Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ https://configrouternotes.blogspot.in  https://configrouter.tumblr.com/  https://in.pinterest.com/phaniconfig/ccna-online-training/  https://configrouternotes.wordpress.com/  https://twitter.com/PhaniConfig 

  2. www.ConfigRouter.com https://trello.com/configrouter  http://flip.it/y5znjX  https://www.reddit.com/user/phani_config/  https://www.scoop.it/t/ccna-exam-answers  http://feeds.feedburner.com/ConfigRouter    CCNA​ ​200-125​ ​Dump​ ​With​ ​Questions​ ​​ ​and​ ​Answers​ ​with​ ​Explanation  CCNA​ ​NetAcad​ ​Training  CCNA​ ​RS​ ​Training  CCNA​ ​Cyber​ ​Ops​ ​Training  CCNA​ ​Data​ ​Center​ ​Training  CCNA​ ​Security​ ​Training https://www.youtube.com/c/CiscoNetworkingVideos Nexus​​OS​​Basics​​and​​Fundamentals​​Complete​​Video​​Course https://www.youtube.com/watch?v=pwn0sT4pOEo&list=PL9UP_4zHScPw49YXOCkK9UFRbPP S55RD2 CCNA​​Cyber​​Ops​​SECFND​​210-250​​Complete​​Video​​Course https://www.youtube.com/watch?v=eT88kco4u5M&list=PL9UP_4zHScPxTqWXRTbTHOUZ4IH BfItpZ CCNA​​Wireless​​200-355​​Complete​​Video​​Course https://www.youtube.com/watch?v=yNnGavnlTZ0&list=PL9UP_4zHScPweZMvKm2mhucuF0X- kO5jV CCNA​​Cloud​​CLDADM​​210-455​​Complete​​Video​​Course https://www.youtube.com/watch?v=GjD27VyOYEQ&list=PL9UP_4zHScPz35gaincmzptwnH1cB M8Oj CCNA​​Data​​Center​​DCICT​​200-155​​Complete​​Video​​Course https://www.youtube.com/watch?v=QMe8ZgviyZ4&list=PL9UP_4zHScPwrrIVgNHW8c2weI-pIgF DL CCNA​​Data​​Center​​DCICN​​200-150​​Complete​​Video​​Course https://www.youtube.com/watch?v=VAJv3C4BgjE&list=PL9UP_4zHScPyjupWBcyODSaJjlR7Se Ik- CCNA​​Cloud​​CLDFND​​200-451​​Complete​​Video​​Course https://www.youtube.com/watch?v=C3SdnXLAA7M&list=PL9UP_4zHScPy8PX3z55iFF0rW66n- 1PDf

  3. www.ConfigRouter.com Q4.​​Which​​devices​​can​​support​​power​​through​​802.3af? a.​​Access​​points b.​​WLCs c.​​IP​​surveillance​​cameras d.​​Cisco​​IP​​Phones Answer:​​A,​​C,​​and​​D http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q5.​​When​​planning​​for​​a​​wireless​​LAN​​deployment​​in​​a​​campus​​network,​​which​​factor​​generally determines​​whether​​to​​deploy​​a​​standalone​​solution​​or​​a​​controller-based​​solution? a.​​Variety​​of​​different​​wireless​​clients​​models​​in​​use,​​such​​as​​Dell,​​HP,​​Intel,​​and​​so​​on b.​​Number​​of​​access​​switches​​in​​the​​campus c.​​Scale​​and​​size​​of​​the​​Wireless​​LAN​​and​​then​​number​​of​​access​​points​​required d.​​Encryption​​requirements Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q6.​​When​​a​​Cisco​​switch​​is​​configured​​for​​a​​Voice​​VLANs,​​connected​​Cisco​​IP​​Phones​​learn​​of the​​Voice​​VLAN​​ID​​(VVID)​​through​​which​​mechanism? a.​​DHCP. b.​​ARP. c.​​CDP. d.​​DNS. e.​​None​​of​​the​​above.​​Cisco​​IP​​Phones​​must​​be​​statically​​configured​​for​​Voice​​VLANs. Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q7.​​When​​deploying​​voice​​(IP​​telephony)​​and​​video​​in​​the​​campus​​network,​​as​​a​​best​​practice where​​in the​​campus​​network​​should​​voice​​traffic​​be​​classified​​for​​QoS? a.​​Distribution​​layer b.​​Core​​layer c.​​Access​​layer

  4. www.ConfigRouter.com Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q8.​​QoS​​has​​no​​affect​​on​​the​​behavior​​of​​traffic​​flows​​in​​the​​campus​​network​​unless​​one​​of​​the following​​conditions​​holds​​true? a.​​There​​is​​congestion​​in​​the​​network. b.​​There​​is​​excess​​available​​bandwidth​​in​​the​​network. c.​​The​​network​​uses​​port-channels. d.​​The​​network​​uses​​802.1q​​trunks​​to​​interconnect​​switches. Answer:​​A http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q9.​​When​​a​​Cisco​​switch​​assigns​​a​​CoS​​value​​to​​an​​incoming​​frame,​​what​​component​​of​​QoS does​​the​​procedure​​map​​to? a.​​Classification​​and​​marking b.​​Shaping​​and​​policing c.​​Congestion​​management d.​​Congestion​​avoidance Answer:​​A http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q10.​​Which​​command​​overrides​​CoS​​values​​on​​ingress​​frames​​to​​1? a.​​mls​​qos​​dscp​​1 b.​​mls​​qos​​trust​​cos c.​​mls​​cos​​1 d.​​mls​​qos​​cos​​1 Answer:​​D http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q11.​​What​​is​​the​​purpose​​of​​trust​​boundaries? a.​​To​​determine​​the​​classification​​of​​a​​packet​​at​​a​​specific​​location​​in​​the​​network.

  5. www.ConfigRouter.com b.​​To​​determine​​where​​in​​the​​network​​packets​​are​​dropped. c.​​To​​determine​​where​​in​​the​​network​​to​​reclassify​​packets. d.​​It​​is​​an​​administrative​​configuration​​in​​which​​Layer​​2​​or​​Layer​​3​​priority​​designations​​of​​frames or​​packets​​are​​either​​accepted​​or​​not. Answer:​​A http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q12.​​Consider​​a​​network​​design​​in​​which​​a​​video​​server​​needs​​a​​higher​​class​​of​​service​​for video​​datacompared​​to​​other​​regular​​data​​traffic.​​The​​server​​does​​not​​support​​802.1q​​tagging​​or setting​​bits​​in​​the​​IP​​field​​for​​priority.​​Furthermore,​​the​​server​​transmits​​other​​management​​traffic besides​​the video.​​Which​​of​​the​​following​​QoS​​components​​and​​methods​​would​​correctly​​prioritize​​traffic from​​the​​video​​server? a.​​Port-based​​classification​​in​​which​​the​​configuration​​would​​set​​all​​ingress​​frames​​from​​the server​​to​​a​​DSCP​​value​​of​​36 b.​​Port-based​​classification​​using​​a​​policy​​map​​that​​uses​​a​​class​​map​​with​​an​​ACL​​that distinctively​​marks​​frames​​for​​video​​traffic​​with​​a​​DSCP​​value​​of​​36 c.​​Using​​a​​policer​​to​​mark​​all​​frames​​from​​the​​server​​above​​a​​certain​​rate​​with​​a​​DSCP​​value​​of 36 d.​​Using​​an​​input​​ACL​​to​​classify​​all​​frames​​from​​the​​server​​with​​a​​DSCP​​value​​of​​36 Answer:​​B http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q13.​​Which​​QoS​​model​​requires​​end-to-end​​configuration? a.​​LFI b.​​IntServ c.​​DiffServ d.​​Traffic​​conditioning Answer:​​B http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q14.​​What​​are​​two​​benefits​​of​​the​​voice​​(auxiliary)​​VLAN​​feature​​of​​Catalyst​​switches?​​(Choose two.)

  6. www.ConfigRouter.com a.​​Reduced​​bandwidth​​utilization b.​​Easier​​troubleshooting c.​​Data​​and​​voice​​segmentation d.​​Redundancy Answer:​​B​​and​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q15.​​Which​​of​​the​​following​​features​​is​​used​​to​​distinguish​​voice​​VLAN​​traffic​​from​​access​​(data) traffic​​in​​a​​packet?​​(Choose​​two.) a.​​ISL​​encapsulation b.​​DHCP c.​​HSRP d.​​802.1Q​​tagging e.​​marking Answer:​​D​​and​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q16.​​By​​default,​​Cisco​​IP​​Phones​​mark​​traffic​​at​​the​​IP​​layer​​and​​at​​Layer​​2.​​Which​​of​​the following​​fields​​is​​marked​​in​​the​​IP​​header​​by​​Cisco​​IP​​Phones​​to​​indicate​​priority​​at​​Layer​​3? a.​​CoS b.​​TTL c.​​DSCP d.​​Checksum e.​​Identifier Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q17.​​What​​differentiates​​IP​​multicast​​from​​other​​transmission​​modes? a.​​IP​​multicast​​sends​​packets​​to​​a​​single​​host. b.​​IP​​multicast​​sends​​packets​​to​​groups​​of​​hosts​​where​​specific​​hosts​​process​​the​​packet. c.​​IP​​multicast​​sends​​packets​​to​​all​​hosts​​sequentially. d.​​IP​​multicast​​sends​​packets​​to​​all​​hosts​​simultaneously. Answer:​​B

  7. www.ConfigRouter.com http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q18.​​What​​is​​one​​potential​​drawback​​to​​source​​distribution​​trees​​compared​​to​​shared distribution​​trees? a.​​Increased​​latency b.​​Increased​​memory​​overhead c.​​Suboptimal​​path​​calculations d.​​Increased​​bandwidth​​utilization Answer:​​D http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q19.​​Under​​which​​condition​​should​​you​​choose​​PIM​​sparse​​mode​​as​​opposed​​to​​PIM​​dense mode? a.​​Bandwidth​​is​​plentiful. b.​​The​​multicast​​group​​has​​many​​members. c.​​The​​hosts​​in​​the​​multicast​​group​​are​​widely​​dispersed. d.​​Almost​​all​​hosts​​on​​the​​network​​belong​​to​​the​​multicast​​group. Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q20.​​Which​​version​​of​​IGMP​​adds​​support​​for​​source​​filtering? a.​​IGMPv1 b.​​IGMPv2 c.​​IGMPv3 d.​​IGMPv3​​lite Answer:​​C http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q21.​​Which​​command​​correctly​​displays​​the​​contents​​of​​the​​IP​​multicast​​routing​​table? a.​​show​​ip​​mfib b.​​show​​ip​​mroute

  8. www.ConfigRouter.com c.​​show​​mroute​​table d.​​show​​ip​​pim​​interface Answer:​​B http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/ Q22.​​When​​preparing​​for​​a​​TelePresence​​deployment​​in​​the​​campus​​network,​​what​​is​​the​​max latency​​that​​traffic​​flow,​​one-way,​​should​​experience? a.​​1​​sec b.​​150​​msec c.​​10​​msec d.​​1​​msec Answer:​​B http://www.configrouter.com/ccnp-switch-faq-preparing-campus-infrastructure-advanced-service s-7438/

More Related