1 / 1

How to make a simple kayak cart step by step easy guide

Describes briefly about how to make a simple kayak cart to get rid of some problems like damaging the kayak or getting injured.<br>

Chris_louis
Download Presentation

How to make a simple kayak cart step by step easy guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HOW TO MAKE A SIMPLE KAYAK CART STEP BY STEP EASY GUIDEGREAT THINGS TO DO WITH JUST FIFTY DOLLARS PREPARE THE CART FRAME First of all measure and mark your PVC pipe and make the frame of the cart. Then cut it into 1 piece: 18- inch, 4 pieces: 8- inch and 2pieces: 9- inch. ATTOUCH THE EDGES USING GLUE The second step is to glue each edge of the 18- inch PVC T- joint and push them firmly together. Now at the opposite edge of the T-joint, glue the two 3-inch pieces. Then glue one 9- inch piece into the vertical section of every T-joint. COVER THE OPEN ENDS Cover the open ends of the two 3- inch pieces with the caps. In this step, you need to be careful about keeping the hole straight & parallel to the PVC pipe. GLUE THE T JOINTS On the top of every 9- inch piece, glue a T- joint and rotate all joints. This will help them to stand perpendicularly to the main T-joint crossbar. Then glue every 8- inch section into the edge of the upper T- Joints. TIGHTEN THE EDGES WITH BOLT Now into the 3/ 8 hole of those caps, insert the steel rod and tighten a bolt on each edge to secure it on the place. Next place one washer, then wheel and then the other washer. Finally, use a bolt to secure the wheel. CUT THE FOAM NOODLE In this step, cut the foam noodle you have, into four 8- inch pieces.Place a slice of foam noodle over every four upper 8- inch support turning the cut facing towards the ground. And secure them by using a plastic zip tie on both edges of each noodle. PLACE THE KAYAK ON THE PADS Now all you need to place your kayak on the pads & secure it in place using the nylon strap. Remember, tighten the kayak properly will ensure to not fall off the cart while going down on the path. for more info: http://trollingpowersolution.com

More Related