1 / 10

Construction of a fiber optic patch cable

<br>https://www.cbo-it.de/de/produkte/blueoptics/transceiver/qsfp.html<br><br>Fiber Optic technology use pulses of light to transmit data into optical fiber cables, therefore it is very important to have a component at the end of these fibers to precisely propagate the transmitted light to its destination.

CBOGmbH
Download Presentation

Construction of a fiber optic patch cable

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Construction of a fiber optic patch cable https://www.cbo-it.de/de/produkte/blueoptics/transceiver/qsfp.html

  2. Fiber Optic technology use pulses of light to transmit data into optical fiber cables, therefore it is very important to have a component at the end of these fibers to precisely propagate the transmitted light to its destination. 

  3. Most of these connectors are made with high quality ceramic components or composite plastics to satisfy a reliable connection between fiber optic networks. 

  4. Ferrule A thin cylindrical component that is usually made from ceramic or high quality plastic. It is used to hold the glass fiber. Generally, hold one strand of fiber in its center and the end of it, is also the end of the fiber.

  5. Connector Body It is the structure that holds the ferrule, primarily made of plastic or metal. It is a housing that supports the fiber cable.

  6. Coupling Mechanism A part of the connector body that provides the mechanism to keep the connector intact when attached into equipment, couplers or ODF (Optical Distribution Frames). It may be a latch type, snap-in, a nut or screwed-on.

  7. The jacket It is used for sheathing and support of the fiber from mechanical and physical handling. It is attached at the connector body by crimping.

  8. Stress Relief Boot Primarily made of soft plastic to protect the cable from stress and mechanical damage. Located at the joint of the cable and connector body and act as a jacket for protection.

  9. Dust Cap A plastic cover to protect the ferrule and the fiber strand from any contamination (dust, dirt, oil, etc.), comes out of the box and usually at the end of the connector.

  10. Contact us Visit here for more information……. https://www.cbo-it.de/de/produkte/blueoptics/transceiver/qsfp.html CBO Germany Friedhofstraße 2345478 Muelheim an der RuhrGermany Tel: 0049 - 208 - 777 247 - 0Fax: 0049 - 208 - 777 247 - 99eMail: info@cbo-it.de

More Related