1 / 10

Unist Australia Pty Ltd. - Metal Forming Solutions

The patented uni-Roller Systems will stop problems such as a messy press, slippery floors, and stamped parts soaking in coolant. We have solutions for material from 25mm to over 1800mm wide. Unist Australia Pty Ltd, 7 Bendtree Way, Castle Hill, NSW 2154, Ph: 02 8850 2022, Web: www.unist.com.au

BiancaSawyer
Download Presentation

Unist Australia Pty Ltd. - Metal Forming Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Metal Forming Solutions www.unist.com.au

  2. Contents • About Us • Metal FormingSolutions • Uni Roller Type S • Mini-Roller • Powered Uni-Roller • SPR-2000 • SPR-2000 JR • Low Volume Spray Nozzle • Contact

  3. Metal Forming Solutions Save Money by eliminating excess stamping fluids. The patented uni-Roller Systems will stop problems such as a messy press, slippery floors, and stamped parts soaking in coolant. We have solutions for material from 25mm to over 1800mm wide. We have the answers for metal formers struggling to apply fluid cost effectively and consistently.

  4. Metal Forming Solutions • Uni-Roller Type S • Applies the precise amount of lubrication to your coil stock at line speeds greater than 100 ft. per minute (30.5 m/minute). Patented design is an unsurpassed solution for metal forming applications when combined with a SPR-2000™ or SPR-2000-JR™ programmable fluid controller.

  5. Metal Forming Solutions • Mini-Roller • Applies the correct amount of fluid for your small press window and high-speed, short feed length applications when combined with a SPR-2000™ or SPR-2000-JR™. This 1 to 4 in. wide (25 mm to 102 mm) unit consistently applies the correct amount of fluid.

  6. Metal Forming Solutions • Powered Uni-Roller • Applies exact amount of fluid needed to lubricate blank stock when combined with a SPR-2000™ or SPR-2000-JR™ programmable fluid controller.

  7. Metal Forming Solutions • SPR-2000 • Programmable Fluid Controller provides full-feature monitoring of critical parameters. • Controls with electronic precision and consistency how much fluid flows to one or more of these Unist systems: Uni-Roller® Type S, Mini-Roller™, Powered Uni-Roller® and/or Spray Nozzle Systems.

  8. Metal Forming Solutions • SPR-2000 JR • Programmable Fluid Controller drives down costs when only two outputs are required. • Saves money. Economically priced, the SPR-2000 JR™ controls fluid flow to one of these Unist systems: Uni-Roller® Type S, Mini-Roller™, Powered Uni-Roller® and/or Spray Nozzle Systems.

  9. Metal Forming Solutions • Low Volume Spray Nozzle • When you need precise control of your lubrication spray, the Unist Low Volume Spray Nozzle delivers with a consistent and controlled spray pattern. The air and fluid volumes are controlled independently by precision needle valves allowing you to fine tune the spray to your specific needs.

  10. Contact Us Unist Australia Pty Ltd. 7 Bendtree Way, Castle Hill, NSW 2154, Australia‎ Ph no: 02 8850 2022 johnbarker@unist.com.au www.unist.com.au

More Related