A. PROGEDIT.EXE B. WIN3X.EXE C. WIN.EXE D. PROGMAN.EXE D. PROGMAN.EXE Which of these programs will allow Windows 95 to emulate Windows 3.1's interface? A. EMM386.EXE B. HIMEM.SYS C. SMARTDRV.EXE D. RAMDRIVE.SYS A. EMM386.EXE Which of the following is an expanded memory emulator?
Related searches for DOSWindows Practice quiz
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
D. PROGMAN.EXEWhich of these programs will allow Windows 95 to emulate Windows 3.1's interface?
A. EMM386.EXEWhich of the following is an expanded memory emulator?
C. Windows/SystemIn which directory are the Registry files stored in Windows 95?
B. 384 KB
C. 1 MB
D. 64 MB
A. 640 KBThe amount of conventional memory available for use by Windows 3.x
C. CONFIG.SYSWhere would the command INSTALL=C:\DOS\SHARE.EXE normally be located?
C) LoadHigh=How would you load device drivers into Upper Memory from the Autoexec.bat ?
A. The system is not calculating the total size of the files because the battery is bad
B) Bad controller
C) Files can have hidden attributes that don't allow them to list in a standard search
D) Defective RAM
C. Files can have hidden attributes
A customer complains his system is telling him his 263 MB hard disk drive is out of space. His standard directory search saysthe TOTAL size of files listed adds up to less that 263 MB. What is the cause?
D) SWPA temporary Swap file has what file extension ?
D) MSCDEX.EXEWhich of the following is loaded for CD-ROM support?
A. Config.SysThe buffers statement is found in what file?
A. associate Acme with with Notepad
B) click File/Open in Notepad
C) make an extension mapping in the Registry
D) associate .TXT files with Notepad
D) associate .TXT files with NotepadHow would you make sure that Acme.txt was always opened by Notepad
A. RENAME + r CBT.EXE
B) ATTRIB + r CBT.EXE
C) COPY +r CBT.EXE
D) MODE +r CBT.EXE
B)ATTRIB + r CBT.EXEWhich command will prevent subsequent changes to the file CBT.EXE?
C) Preemptive and Cooperative
D) Windows 3.1 does not support Multitasking
B) CooperativeWindows 3.1 supports what type(s) of Multitasking ?
B. Control Panel/ Drivers
C. into Upper memory
D. Config.SysWhere do you load the CD Rom drivers ?
B. ATTRIB C:\*.SYS A:\
C. XCOPY C:\DOS\*.* A:\
D. SYS C: A:
D. SYS C: A:When executed from a bootable hard drive, which command will make a formatted floppy disk bootable?
B. CONFIG.SYS, AUTOEXEC.BAT
C. AUTOEXEC.BAT, COMMAND.COM
D. CONFIG.BAT, AUTOEXEC.BAT
B. CONFIG.SYS, AUTOEXEC.BATWhich of the following represents a correct sequence for the boot process on a DOS machine?
B. F5In DOS, which of the following keys will bypass the CONFIG.SYS and AUTOEXEC.BAT files?
B. Use the SETVER command
C. Restore the old DOS version
D. Contact the application's vendor support line
B. Use the SETVER command
After upgrading your computer to a new DOS version, an older application displays the error message "Incorrect DOSversion". What should you do to run this application?
B) Video devices
D) Hard drives
A. Floppies, C. CD-ROMS, and D. Hard drivesIn DOS version 6.x SMARTDRV.EXE can cache _____________. (choose all that apply)
b) The conventional memory is re-mapped to the top of the extended memory
c) Data stored in RAM chips on adapter cards are shadowed into extended memory
d) Instructions stored in various ROM chips are copied into extended memory
D) instructions stored in ROM chips (BIOS) are copied into extended memoryWhen SHADOWING is enabled in a computers BIOS:
B. The operating system does not allots each application a certain amount of processor time.
C. The control of the CPU does not belong to the application.
D. If an application crashes, it does not affect other applications.
D. If an application crashes, it does not affect other applications.Which of the following is true about Preemptive Multitasking?
A. Manages graphics and printing. checking
B. Handles aspects of the User interface.
C. Loads and executes Windows application.
D. Loads and executes Windows application.
A. Manages graphics and printing.What is the purpose of the Windows Core File GDI.EXE?
A. WIN386.EXE checking
A. WIN386.EXEWhich of the following files will WIN.COM execute to load Windows in 386 Enhanced Mode?
A. Loads and executes Windows applications and handles their memory management in Enhanced Mode.
B. Manages input and output from keyboard, mouse, COM ports, monitors and printers.
C. Interface between windows and the computer hardware.
D. Handles aspects of the user interface.
A. Loads and executes Windows applications and handles their memory management in Enhanced Mode.What does the Windows File KRNL386.EXE do?
A. Entries used to modify the Windows environment. memory management in Enhanced Mode.
B. Custom hardware setup.
C. Screen color schemes and patterns.
D. The content of program groups.
B. Custom hardware setupIn Windows, what information does the SYSTEM.INI file store?
A. Entries are used to modify the Windows environment according to user preferences.
B. Defines the content of program groups.
C. Describes the screen color schemes and patterns.
D. Entries used to customize the hardware needs.
B. Defines the content of program groups.What are the contents of the Windows file PROGRAM.INI?
A. It does away with several INI files that contain program configuration.
B. It can be edited with any text editor.
C. It provides a single common location for all configuration and program settings.
D. You can view and edit the Registry with REGEDIT.EXE.
B. It can be edited with any text editor.Which of the following is not true regarding the Registry?
A. WIN.INI configuration.
B.SYSTEM.INIThe only INI file needed to run Windows 3.x is _____.
A. configuration.a device is disabled due to either some type of user selection conflict
B. a device is experiencing a direct hardware conflict with another device
C. the selected device is not present on the system
D. the selected device is not operating properly and requires repair
B. a device is experiencing a direct hardware conflict with another deviceWindows 95 Device Manager displays an exclamation point inside a yellow circle when _____.
A. MEMMAKER configuration.
C. Resource Meter
D. System Monitor
D. System MonitorThe Windows 95 utility that allows the tracking of key system components is _____.
A. CONFIG.SYS configuration.
D. MDDOS.SYS (must set BootMulti= 1)Which Windows 95 file would be modified for dual-booting purposes?
A. configuration.IO.SYS and MSDOS.SYS
B. DETLOG.TXT and DETCRASH.LOG
C. CONFIG.SYS and AUTOEXEC.BAT
D. SYSTEM.DAT and USER.DAT
C. CONFIG.SYS and AUTOEXEC.BATWhen installing Windows 95, which of the following files are not created?
A. a software problem configuration.
B. a hardware problem
C. a BIOS problem
D. a setup/configuration problem
D. a setup/configuration problemIf a new option is installed in the system and it refuses to operate, what type of problem should be assumed?
A. configuration.holding down the CTRL key
B. pressing the left SHIFT key
C. pressing the SPACEBAR
D. pressing the ENTER key
B. pressing the left SHIFT keyYou can prevent programs in the WIN95 Startup forder from running on bootup by _____.
A. T configuration.here is not enough RAM to run Windows 95
B. The hard drive is full
C. The hard drive has been damaged
D. Virtual memory is disabled
D. Virtual memory is disabledWindows 95 is running and crashes. It will not start because _____.
A. B configuration.oot the system and run the CONFIG.SYS file one line at a time.
B. Edit the AUTOEXEC.BAT file.
C. Boot the system and run the AUTOEXEC.BAT file one line at a time.
D. Run MSD, and edit the system files accordingly.
D. Run MSD, and edit the system files accordingly.To identify I/O, Interrupt, or upper memory conflicts, _____.
Microsoft System Diagnostics (MSD.EXE) is a diagnostic program that ships with Win95. It helps in troubleshooting hardware and software conflicts
A. configuration.When installing a brand new system
B. When adding a CD-ROM drive to the system
C. When adding an additional hard drive to the system
D. When changing the video display to a new type
B. When adding a CD-ROM drive to the systemUnder what circumstances would it not be necessary to run the CMOS SETUP program?
A. Print Manager configuration.
B. File Manager
C. Device Manager
D. System Manager
C. Device managerIn Windows 95, where do you go to correct any conflicting IRQs?
A. t configuration.he HIMEM.SYS file is corrupt
B. a bad RAM chip has been detected
C. the ROM BIOS chip is defective
D. the system cache should be replaced
B. a bad RAM chip has been detectedWhen booting, a computer reports that the system has detected unstable memory at such and such an address. This means that ____.
A. configuration.replace lost or damaged system files on the HDD
B. make adjustments to the display settings
C. change the system configuration
D. access the CD-ROM drive
A. replace lost or damaged system files on the HDDA windows 95 Startup disk allows you to _____.