1 / 4

Fundamentals of Structural Detailing

Fundamentals of Structural Detailing. Column Base Details. Column Base Details.

Audrey
Download Presentation

Fundamentals of Structural Detailing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fundamentals of Structural Detailing Column Base Details

  2. Column Base Details A column base detail shows the connection of the column to the footing. The connection detail shows how the column will be attached to the footing. The dimensions usually show the grout thickness, thread projection of the anchor bolts, and the total projection of the anchor bolt.

  3. Column Base Details The construction of the footings is not part of the steel fabricators work but masonry plans may show certain items which the steel fabricator is required to furnish. These items may include anchor bolts, leveling plates, grilles, machinery supports, etc. which must be placed by the masonry contractor prior to the erection of the steel framing. An anchor bolt plan is furnished by the steel fabricator to the masonry contractor to show the field placement of the anchor bolts. Information should include Center to Center dimensions of columns, location dimensions for anchor bolts, center to center dimensions of anchor bolts, erection marks, elevations at the tops of base plates and leveling plates, grout thickness, and projection of anchor bolts above the top of the concrete.

  4. Column Base Details Anchor Bolt (E) 1/2 (note: E = 1/2" to 1") Nut (t) 5/8 Washer (t) 0.177 Angle (t) 3/8 Base Plate (t) 3/4 Grout (t) 1 Projection (H) 3.93 (round to 4") Thread length on the anchor bolt is equal to the projection (H) minus the grout thickness.

More Related