1 / 34

International Organization for Standardization (ISO)

International Organization for Standardization (ISO) . SEVAL 2010 Berne 10 September 2010 Sean Mac Curtain ISO Head of Conformity Assessment CASCO Secretary. Outline. Introduction and megatrends ISO System ISO’s international network Some key principles Types of standards

Anita
Download Presentation

International Organization for Standardization (ISO)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. International Organization for Standardization (ISO) SEVAL 2010 Berne 10 September 2010 Sean Mac Curtain ISO Head of Conformity Assessment CASCO Secretary

  2. Outline Introduction and megatrends ISO System ISO’s international network Some key principles Types of standards A world in turmoil Emerging areas Topical standards areas Examples of standards in key issues Conformity assessment ISO Award

  3. Introduction: - A World in turmoil and new paradigms Volatile financial markets and economies in recession / fragile recovery? Aspiration for sustainable development. Inter-related issues of climate change, energy, food and water UN Millenium Goals and developing countries Converging technologies Speed to market and new ways of getting information World trade and who leads ?

  4. Who benefits from standards States and communities – Economiccompetitivity and access to world markets, regulation, sustainable development, loyal competition, public purchases… Companies – Technology transfer, market knowledge, good management practices, quality recognition… Consumers – Products and servicescomparison, quality improvement, information on performance, security and impact on environment Researchers – Measurements, risk assessment, dissemination of innovation, not re-inventing the wheel!

  5. Standards help business thrive Impact internal business quality culture and product reliability - give competitive edge Help business adopt sustainable development practices (e.g. environmental management, social responsibility, life cycle assessment for products, energy efficiency and management, etc.) Assists efficient resource allocation (e.g. government procurement, public works, services, etc.) Bridge the knowledge gap and enhance innovation

  6. The ISO system - Governance 6

  7. 1 038 standards produced in 2009 Collection of 18 083ISO Standards The ISO System 163 national members 98% of world GNI 97% of world population As of 3 June 2010 • IT tools • Standards development procedures • Consensus building • Dissemination 195 active TCs 3 238 technical bodies 50 000 experts Central Secretariatin Geneva 153 FTE staff

  8. Extent of ISO System 18083 ISO Standards 153 full-time posts Secretary Chairman 737 Secretariats held by 39 countries About 210 TCs(195 active) Ch 519 SCs Convenor C 2443 WGs 3769 active projects at 2009-12-31

  9. Standards generation ISO Standard A normative document, developed according to consensus procedures, which has been approved by the ISO membership and P-members of the responsible committee in accordance with Part 1 of the ISO/IEC Directives as a draft International Standard and/or as a final draft International Standard and which has been published by the ISO Central Secretariat ISO/PAS Publicly available specification A normative document representing the consensus within a working group. ISO/TS Technical specification A normative document representing the technical consensus within an ISO committee ISO/TR Technical report An informative document containing information of a different kind from that normally published in a normative document. International Workshop Agreement (IWA) An IWA is an ISO document produced through workshop meeting(s) and not through the  technical committee process. ISO Guide Guides provide guidance to technical committees for the preparation of standards, often on broad fields or topics

  10. The World Standards Cooperation (WSC) Multi-discipline and cross sector For electrotechnology For telecommunications The leading international standards organizations Collaborate to meet the challenges of converging technologies 10

  11. ISO’s international network WTO : TBT, SPS and GATS (services) agreements UN and UN agencies: CODEX, ILO, IMO, ITC, UNECE, UNEP, UNGC, UNIDO, WHO, etc 591 liaisons with international organizations in technical work Links with six regional bodies (ACCSQ, AIDMO, ARSO, CEN, COPANT, EASC) and PASC Economic actors: Accreditation: IAF and ILAC, Consumers International, ICC, IFAN, World Economic Forum, etc…

  12. Formal International StandardizationSome key principles Transparency * Openness * Consensus and impartiality * Market relevance and effectiveness * Coherence * Development dimension * Stakeholder engagement Due process National implementation/adoption * explicit principles for the “development of international standards, guides and recommendations with relation to articles 2, 5 and Annex 3 of the WTO/TBT agreement”

  13. Different types of ISO International Standards Terms and definitions Graphical symbols, pictograms and labeling Measurement, analysis and test methods Interoperability requirements Processing, validation and exchange of data Performance characteristics for safety, security, health, environmental requirements Organizational and management practices Packaging and labeling Conformity assessment

  14. Topical standards areas in ISO Oil and gas Industrial engineering Automobile Ships and marine technology Building and construction Climate change Energy efficiency Water Finance Biotechnology Food and nutrition Healthcare Security Information technologies Consumer protection and information Services Social responsibility Sustainability Quality management Conformity assessment

  15. Examples of standardization in key sectorsThe oil and gas industry ISO/TC 67 - Materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Products and component specification and interoperability 164 IS and 60 in progress Involvement of and adoption by CEN and American Petroleum Institute ISO/TS 29001: application of ISO 9001 for suppliers of the oil and gas industry

  16. Examples of standardization in key sectorsAutomobiles ISO/TC 22 on motor vehicles Collaboration with regulators: WP.29 of UNECE Testing for safety, noise and environmental impact Ergonomics and graphical symbols Quality management: ISO 16949 and the IATF Road traffic safety management:ISO/TC 241 Intelligent Transport Systems : ISO/TC 204 Battery Technology Natural gas fuelling stations for vehicles: PC 252

  17. Example of standardization on key issuesResponding to climate change Environmental management: the ISO 14000 series ISO 14064/65: Greenhouse gas (GHG) quantification, verification, validation - ‘GHG Protocol’ and ‘Voluntary Carbon Standard’ real-life implementations Others in ISO 14000 series on environmental management, lifecycle assessment, labelling … “Carbon Footprint” investigations underway FAO/WMO with ISO/TC 211 to help track ‘essential climate variables’ ISO at Bali UNFCCC, at COP 15 in Copenhagen Expanding cooperation with UNEP FAQ 1.3, Figure 1

  18. Example of standardization on key issuesEnergy Over 20 ISO Technical Committeesinvolved in aspects of energy efficiency and renewables ISO SAG on Energy efficiency and renewable sources (SAG-E) Joint ISO/IEC PC on international terminology for energy efficiency and renewable energy sources • Significant progress on energy management systems (ISO 50001, ISO/PC 242) • Industrial energy efficiency (SAG-E recommendation) • Increase of efficiency and emission reduction of road vehicles (ISO/TC 22, partnership with UNECE WP 29 and ITF) • Sustainability in construction and energy efficiency of buildings • New committees on biofuels including sustainability of biofuels • Cooperation with IEA, WEC, IEC, ITF and UNIDO Updated Sept. 2009

  19. ISO/TC 30 – important work on “water metering” in closed conduits in close collaboraton with CEN and OIML ISO/TC 113, Hydrometry: open channels & groundwater: assessment of water resources possible only by its proper measurement ISO/TC 147, Water quality – 245 published standards: sampling and measurement of physical, (bio-)chemical, (micro-)biological water characteristics ISO/TC 224, Water treatment and drinking water – quality of services – providing confidence in areas of public/private transition NWIP on «Treated wastewater reuse implementation» accepted Example of standardization on key issues The water challenge Updated Sept. 2009

  20. Example of standardization on key issues Food, agriculture and nutrition • ISO/TC 34, Food products • 756 standards • Food safety (ISO 22000 series) • Detection of GMOs • Food traceability systems • Good manufacturing practices • Quality management systems for crop production • Irradiation of food • Microbiological examination methods • Many test methods for seeds, fruits and vegetables, cereals, milk, meat and poultry, spices, coffee, tea .. • ISO/TC 93 on starch – established test methods • ISO/TC 234 on fishery and aquaculture – ensuring sound ‘farmed fish’ production • Relations with WHO/FAO (Codex Alimentarius), OECD, UN-ECE + WTO/SPS + Retailers + Consumers

  21. Example of standardization on key issues Security Supply chain: ISO 28000 series Societal security: ISO/TC 223 Information security: ISO 27000 Biometrics

  22. Example of standardization on key issues Information and Communication Technologies Information security: the ISO/IEC 27000 series Quality of IT services: the ISO/IEC 20000 series Enabling e-business and supporting financial services IT in buildings: building control systems design

  23. Example of standardization on key issues Health and safety Standards provides for an invaluable resource supporting public health and safety policies and infrastructures Safety requirements are addressd by a large variety of products standards A large number of ISO standards covers the healthcare sector: e.g.: Clinical evaluation and testing of medical devices Clinical laboratories Health informatics and interoperability Quality management in health services

  24. Example of standardization on key sectors Services Financial services : ISO/TC 68 Tourism : ISO/TC 228 Water services : ISO/TC 224 Education and training : ISO/TC 232 COPOLCO Guide on servicesto consumers

  25. Example of standardization on key issues Consumer information and protection Safety, quality, comparability of consumer products and domestic appliances Integrity of claims and informative labelling (quality, safety, environment, ethical trade, and others) COPOLCO as catalyst for new policy and standardization areas: Social responsibility Needs of vulnerable populations: elderly, persons with disabilities, children Product recall Customer service (codes of conduct, complaints handling, dispute resolution)

  26. Example of standardization on key issuesQuality Management Over 1 million ISO 9001:2000 certificates in 179 countries (in 2009) Sector implementations ofISO 9000: automobile, aeronautics, telecoms, railways, medical devices… Market surveillance of certification to ISO management system standards

  27. Conformity assessment Conformity assessment means checking whether products, services, materials, processes, systems and personnel measure up to the requirements of standards, regulations or other specifications. Conformity assessment benefits manufacturers, service providers, users, consumers and regulators. It facilitates international trade and supports sustainable development. ISO and IEC jointly develop International Standards and Guides through the ISO Committee on conformity assessment (CASCO),these documents are referred to as the ‘CASCO toolbox’.

  28. ISO/CASCO: The ISO Committee for Conformity Assessment 111 ISO members are represented in CASCO, of which 69 are participating members and 42 observers 17 international organizations are liaison members of CASCO: BIPM, CAC, CEOC, EOQ, Eurolab, IAF, IFAN, IFIA, IIOC, ILAC, INLAC, IPC, IQNet, ITU-T, OIML, UNFCCC and UILI The CASCO Toolbox consists of 27 documents (IS and Guides) covering: Vocabulary, principles and common elements of conformity assessment Code of good practice Product, system, and persons certification Testing, calibration, inspection, marks of conformity Supplier’s declaration of conformity, accreditation, peer assessment, and mutual recognition arrangements

  29. The 1-1-1 Dream

  30. The Conformity Assessment processes Test done by: Attestation type SDoC (Self Declaration of Conformity) 1st party(the manufacturer, service provider) Object 2nd party(the purchaser, the client) Contract + 3rd party -independent(certification body, laboratory,inspection body...) Certificate Requirements 3rd party bodies can be accredited. Accreditation bodies are assessed by their pairs

  31. Example of risk based conformity assessment Manufacturer of nails Manufacturer of medical devices High risk(pacemaker, radiotherapy machine…) Very low risk, or no risk Done by the manufacturer Specifications to be met Initial test of first batch of nails Specified by the client / regulator No full ISO 9001system needed The quality of the production is continually assessed Production Degree of QMS Amount of surveillance Who does the certification Production Testing of nails when a change occurs (equipment or design) Test No accreditation required Accreditation required

  32. Topical issues related to conformity assessment Product (incl. service and process) certification (ISO/IEC 17065) + fundamentals of product certification (ISO/IEC 17067) Requirements on inspection bodies (ISO/IEC 17020) Certification of persons (ISO/IEC 17024) ISO’s neutrality policy Qualification of assessors (AB) / auditors specific requirements (CB) Manual on conformity assessment and market surveillance

  33. ISO Award on Higher Education in Standardization

  34. THANK YOU ! Sean Mac Curtainmaccurtain@iso.org www.iso.org

More Related