1 / 29

Eliott Dear Lawyer - Law of Variable Proportions

Eliott Dear Lawyer is explaining the Law of Variable Proportions.

1984
Download Presentation

Eliott Dear Lawyer - Law of Variable Proportions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Law of Variable Proportions

  2. CONTENTS Introduction Key concept of law Production function with time period analysis Definition of the law Assumptions and example Table and calculations of AP and MP Graph 3 stages of law of variable proportion Important results and relationships Application and importance of law Laws of return as law of cost Table, calculation and graph Conclusion • • • • • • • • • • • • •

  3. Introduction  When producing an economic product, the supplier must decide how much of each input to use: ◦ Land ◦ Labor ◦ Capital  In particular, the supplier must examine the relation between input and output

  4. The Law of Variable Proportions  Is the answer to the question: How will total output change when all inputs except one are fixed? (Answer to be provided later)  Two ways to illustrate the answer: ◦ Production schedule (chart) ◦ Production function (graph)  Usually, as in this example, labor is the variable input; all other variables are held constant

  5. Key Concept: Marginal Product  Marginal product is the amount that total output increases by adding one more unit of an input  We can calculate Marginal Product as MP = Change in output / change in input  Marginal product is calculated by subtracting the most recent total product (# of units produced) from the new total product

  6. Production Function • The law of variable proportion analyses the input output relationship in the short run through the marginal implication. It studies the production function with one variable input and other inputs remains constant • Production function relates inputs to outputs. It describes the technological relation between the inputs that a firm uses and the output that it produces. A production function can be written as q=f (land, labour, technology,………..) • It describes the flow of inputs to flow of output

  7. Production function with time period analysis • Economists describe production function as being affected by time. When firms plan to increase their production , they have two options • Increase all the factors in same proportion, known as scale of production. This is a long run analysis • Increase the amount of some factors keeping others as constant. This is a short run analysis • When the firm decide to increase output by changing only a variable factor, they have to face the law of variable proportions

  8. Definition of Law of Variable Proportion • Law of variable Proportion refers to the behavior of output as the quantity of one factor is increased, keeping the quantity of other factor fixed and further it states that the marginal product and average product will eventually decline • As more and more units of a factor of production are added to fixed factor, the total product rises, at first more in proportion to increase in variable factor, then less in proportion and finally decreases

  9. Hypothetical Example and its Assumptions • In our example we illustrate the assumption as:- – Land is fixed factor – Labour is variable factor – Technology is fixed – Wheat is grown on a Farm – Labour is equally efficient

  10. The Stages of Law of variable Proportions • The behavior of output when the varying quantity of one factor is combining with a fixed quantity of the other can be divided into 3 distinct stages. In order to understand these three stages it is better to graphically illustrate the production function with one factor variable. • There are three stages of this law. – Increasing Returns – Diminishing Returns – Negative Returns

  11. Table 1 Land and Capital (Units of fixed factor) Workers (Units of variable factor) Total Product (TP) (tons of wheat) Marginal Product (MP) Average Product (AV) Stages of Variable Proportions 10 10 10 10 10 10 10 10 10 10 0 1 2 3 4 5 6 7 8 9 0 6 - 6 8 - 6 7 8 8 Increasing returns 14 24 32 38 42 44 44 42 10 8 6 4 2 0 -2 7.6 7 6.2 5.5 4.8 Decreasing returns (negative returns)

  12. Calculations of Total Product, Average Product and Marginal Product Total Product Total Product is defined as the sum total volume of Production or total number of Units produced with the given fixed and variable inputs. Average Product Average product is defined as the ratio between total product and number of units of variable factor. AP = TP / Units of Variable Factor Marginal Product Marginal Product is defined as the Increment in total output due to the use of an extra unit of labour. MP = Change in Total Product / Change in Variable Factor OR MP = ∆ TP/∆ L

  13. Graphical Representation of Three Stages of Law of Variable Proportions 3RDSTAGE Negative Returns 2NDSTAGE Decreasing Returns 1st STAGE Increasing Returns TOTAL PRODUCT PRODUCT AVERAGE PRODUCT MARGINAL PRODUCT WORKER

  14. Three Stages of Law of Variable Proportions Law of variable proportions consists of three phases. ✓ Increasing returns In many cases, the increase in variable factor is initially followed by increasing marginal returns i.e. total output increases more than proportionally to the variable factor. This phase does no last longer. Soon the Law of diminishing starts ✓ Decreasing returns If increase in variable factor is continued, the marginal product starts falling i.e. the law of decreasing sets in. This law is more universal and lasts longer. No business can escape this law. Sooner or later every economic activity comes under this law ✓ Negative returns When a business experiences decreasing returns and the quantity of variable factor is further increased, the marginal returns becomes negative

  15. Important Results and Relationships Relation between Marginal and Total Quantity ➢ Marginal quantity shows the rate of change of total quantity ➢ When marginal quantity increases it means the total quantity increases at increasing rate, while if marginal quantity is decreasing, (but positive) total quantity increases at decreasing rate ➢ When total quantity increases, marginal quantity is positive ➢ When total quantity is maximum, marginal quantity is zero ➢ When total quantity falls, marginal quantity is negative

  16. Important Results and Relationships Relation between Average and Marginal Quantity ➢ When average quantity is increasing, marginal quantity is greater than average quantity. ➢ When average quantity is decreasing, marginal quantity is less than average quantity. ➢ When average quantity is neither increasing nor decreasing, marginal quantity is equal to average quantity

  17. Important Results and Relationships Relation between Total and Average Quantity ➢ Average quantity is equal to the total quantity divided by the number of units of a factor employed Average = Total / Units ➢ When average is zero, total quantity is zero

  18. Rationale The law of variable proportions explains the engineering aspect of • production. This is expressed in physical units of output and not in rupees. The reason for non proportional change in output is that different factors of production are not perfect substitutes for each other. They can be substituted only up to a certain extent in limited quantities. The law of variable proportions consists of two parts viz. increasing returns and decreasing returns. But the most important part of variable proportions is the law of diminishing marginal returns.

  19. Summary • The Law of Variable Proportions states that while varying only one input, output will go through three stages: – Increasing returns – Diminishing returns (ideal) – Negative returns

  20. Conclusions • While adding units of an input (labor), the marginal product goes through three stages: • Stage I (Increasing returns): Marginal product increases throughout – This means that every additional unit increases productivity as well as total output – This is shown on the graph by an increasing slope of total Product curve

  21. Conclusions  Stage II (diminishing returns): Marginal product decreases throughout. ◦ This means that every additional unit decreases productivity, though total output still increases. ◦ This is shown on the graph by a decreasing positive slope of total product curve Marginal product is  Stage III (negative returns): negative throughout. ◦ This means that each additional unit actually decreases total output. ◦ A waste of money and resources. This is shown on the graph by a negative slope

  22. Conclusions • The greatest productivity is at the end of Stage I • The greatest output is at the end of Stage II • Therefore, Stage II is ideal, because there is a balance between productivity and total output

  23. APPLICATION / IMPORTANCE OF LAW OF DIMINISHING RETURNS • The law cannot be applied only to agriculture but to extractive industries like mining, fisheries and also to building industries • It is applied to those areas where nature is supreme • The law is universal and can applied everywhere

  24. LAWS OF RETURNS AS LAWS OF COST • If we introduce the prices of the factors and the price of output produced, the laws of returns give rise to laws of cost. • There are two main Stages of Laws of Cost – Increasing Cost – Decreasing Cost

  25. Table COST OF ONE WORKER (WAGES) MARGINAL COST OF OUTPUT (RS. /CAKE), MC = COST/MP WORKERS TP (CAKES) MP 1 2 3 4 5 6 10 25 45 60 70 75 10 15 20 15 10 5 100 100 100 100 100 100 10 6.6 5 6.6 10 20

  26. Calculation of Marginal Cost of Output ➢ Marginal cost for the given table can be calculated Cost of Variable factor = W = 100 units Marginal Product of 2ndworker=15 units Marginal cost of the product = W / MP = 100/15 = 6.6 units ➢ Mathematically, TC = wL+rK. If capital is fixed, TC= wL, where rK is fixed cost so MC = ∆TC/ ∆Q. If labor is variable and keeping w constant so ∆TC = w∆L. MC= ∆TC/∆Q = w∆L/∆Q = w/(∆Q/ ∆L) and MPL= ∆Q/ ∆L , hence MC = w/MPL and w= wage rate, so MC = cost/ MP

  27. Marginal Product & Marginal Cost Marginal Product… 25 B 20 15 10 5 Workers 0 1 2 3 4 5 6 Marginal Cost of Output… 25 20 E 15 H 10 5 Output 0 1 2 3 4 5 6

  28. ALTERNATE NAMES OF LAWS OF VARIABLE PROPORTIONS AND LAWS OF COST • Law of increasing returns is also known as Law of Decreasing Marginal Cost • Law of decreasing returns is also known as law of Increasing Marginal Cost

  29. Queries & Suggestions

More Related