1 / 7

Step By Step Installation Process Of Epoxy Flake Flooring

Here are some steps for all the installation steps for the floor, implementing them in the right manner can enhance its usefulness for a longer period.

12584
Download Presentation

Step By Step Installation Process Of Epoxy Flake Flooring

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. STEP BY STEP INSTALLATION PROCESS OF EPOXY FLAKE FLOORING

  2. CLEANING THE FLOOR The first step should be cleaning the surface to remove any kind of stain. To clean the loose dust from the floor, use a broom, or a compressed air cleaner. Moreover, you can wipe up hard stains like grease, oil spills, etc. with the help of concrete cleaning products.

  3. PREPARATIO N OF THE FLOOR SURFACE Once the floor is properly cleaned, it should also be checked for defects that require special attention before proceeding forward with flake flooring installation. For instance, repairing cracks or chips and filling up joints. As a result, it will level up the floor surface evenly.

  4. PRIME THE FLOOR Primer is the essential product for successful flake flooring installation, especially in high- traffic areas. Apply a thin coat of high-quality primer on the surface with the help of a spray or a roller. Avoid over-coating as it can lead to puddling.

  5. APPLY THE EPOXY PAINT Mix the resin and hardener in the right proportion according to the manufacturer’s direction. Prepare the smooth solution using a paddlewheel mixer, drill, and mixing bucket. The best way of application is in sections that fasten up the applying and drying process as well.

  6. CONTACT US 0407 682 576 accounts@allgrind.com.au https://allgrind.com.au/

  7. THANK YOU

More Related